Type:
Engine Lathes
Manufacturer:
ACRA
Model:
1460 TVS
Condition:
New - In-Stock
Year:
2020
Stock #:
21406
Status:
For Sale
New
ACRA 1460TVS Precision Variable Speed Gap Bed Engine Lathe Capacity 14/21" x 60" Acra’s 1460TVS Precision Variable Speed Gap Bed Engine Lathes are made in Taiwan and feature the following: Bed & Stand: Base One Piece Casting Meehanite Casting, Vibration Stress Relieved Induction hardened And Precision Ground Bed Ways Precision Hand Scraped Removable Gap Foot Brake Turcite B Coating Between The Bed And Carriage Spindle: Supported By 2 Precision Taper Roller Bearings And One Ball Bearing Dynamically Balanced, Hardened, And Precision Ground D1-6 Spindle Nose 2-1/6” Diameter Spindle Nose Apron & Saddle: Automatic Feed And Threading, Fully Interlocked Saddle And Top Slide Locking System Forward-Off-Reverse Lever 4 Way Tool Post Universal Gear Box: Oil Bath Lubrication Heat Treated Precision Ground Gears Inch, Metric, Module, And Diametrical Threads Drive: 5 HP 4 Pole AC Inverter UL AC Inverter Conveniently Located Control Panel Digital RPM Meter 20~400 RPM Low Range 400~2800 RPM High Range Head Stock: TVS Series-Pressurized Lubrication System All Gears Chromium Molybdenum, Heat Treated And Precision Ground
Standard Equipment: 8″ 3-Jaw Chuck Full Length Splash Guard Inverter Controlled Motor 10″ 4-Jaw Chuck Coolant System Face Plate Steady/Follow Rest 4 Way Tool Holder Center Sleeve Foot Brake Chuck Guard Halogen Light OPTIONAL Face Plate $350.00 Micro Bed Stop $300.00 Taper Attachment $1,500.00 Taper Attachment Installation $425.00 Lever Type 5C Collet Closer JFK $1,500.00 Import Collet Closer (Taiwan) $1,000.00 Newall Digital Readout 8"x60" DP700 $2,900.00 Newall Digital Readout 8"x60" NMS300 $1,350.00 Acu-Rite Digital Readout 8"x60" 203 $2,620.00 Acu-Rite Digital Readout 8"x60" 303 $3,025.00 Mitutoyo Digital Readout $1,620.00 Sony Digital Readout $P.O.R Fagor Digital Readout $P.O.R Digital Readout Installation $250.00 Aloris Tool Post Set (CXA) 5pc $1,065.00 Import Quick Change Tool Holder $450.0
| Swing | 14.188" |
| Centers | 60" |
| Spindle Bore | 2.0625" |
| Power | 5 hp |
| RPM | 2,500 RPM |
| Swing Over Cross Slide | 8.375" |
| Weight | 3,650 lbs |
Capacity: 14″/21″ x 60″ Swing Over Bed: 14-3/16″ Swing Over Cross Slide: 8-3/8″ Swing In Gap: 21″ Distance Between Centers: 60″ Bed Width: 10-1/4″ Headstock: Spindle Nose: D1-6 Spindle Bore: 2-1/16″ Taper of Spindle: MT NO.6 Spindle Speeds – Steps: 2 Spindle Speeds – Range: 20 ~ 2500 RPM Carriage: Cross Slide Travel: 8-11/16″ Compound Slide Travel: 5-1/2″ Threads & Feeds: Inch Threads: 2 ~ 72 TPI Metric Threads: 0.2 ~ 14 mm Longitudinal Feeds: 0.002 ~ 0.067″/rev Cross Feeds: 0.001 ~ 0.034″/rev Tailstock: Quill Diameter: 2″ Quill Travel: 6″ Quill Taper: MT NO.4 Power: Spindle Drive Motor: 5 HP Voltage: 230V AC / 3 PH / 1 PH
