X/Y/Z-axis travel 32.28"/19.69"/21.65" B-axis tilting angle ＋100℃～－100℃ C-axis tilting angle 360° Distance between spindle center and table center (X-axis right and left,table horizontal) 17.72"～－14.57" Distance between spindle center and table center (Y-axis front and back,Both table horizontal and vertical)-9.8"～9.8" Distance from table top to spindle end (Z-axis up and down,table horizontal) 0～21.65" Distance from table top to turning tool post end (Z-axis up and down,table horizontal) 1.22"～22.87" Size of working surface φ15.75" Permissible mass of workpiece(center) 330 lbs Table working surface conifiguration T-slots 14H8×5 Height from floor to table top 1,240mm48.82" Spindle speeds 100～15,000min-1  100～20,000min-1(OP) Spindle nose(Nominal size,No.) BT40 Rapid traverse X,Y,Z:48m/min B 50min-1 C(milling mode) 18,000deg/min(50min-1) Turning Feedrate X,Y,Z:1～48m/min B 1～40min-1 C(milling mode) 1～18,000deg/min(0.03～15min-1) C(turning mode)30～2,000min-1 Motor Spindle motor  High speed 10min/30min continuous 25HP/20HP/15HP  Low speed continuous 10HP C-axis motor(Built in spindle) 15min／continuous 34kW/31kW Feed motors  X-axis AC 4kW  Y-axis AC 4kW  Z-axis AC 7kW  B-axis AC 8.1kW ATC tool storage capacity 32tools Height machine 121.85" Floor space 137"× 128.2" Machine weight 27,500 lbs Controller FANUC Series 31i Power Requirement 91 KVA