New
SHARP Model 2280B “B” Series Precision Lathe 22" Swing 80" CC 4.5" Bore
Engine Lathes| $44,865.00 USD |
SHARP Model 2280B “B” Series Precision Lathe 22" Swing 80" CC 4.5" Bore
This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting.
FEATURES:
• D1-11 Camlock
• 4.5” Spindle Bore
• Direct Selection For Inch/Metric Threads
• One Piece Cast Meehanite Bed
• Quick Change Gearbox
• 15 HP Motor
• 12-Speed Gear Head (10-1,000 RPM)
STANDARD EQUIPMENT:
• 4-Jaw 16” Chuck.
• Coolant System
• 4 Way Tool Post
• Halogen Work Light
• Face Plate 20”
• Steady Rest 12” (3.2”-10.6”)
• 4-Way Carriage Stop
• Splash Guard
• 16” swing chuck guard, optional 22” swing chuck guard is available
• Tailstock
• Follow Rest ( 0.79” – 3.94”)
• Wired 220V or 440V. Please Specify
• Tool Kit:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint
OPTIONAL ACCESSORIES:
• 3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $ 2,580.00
• 3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $ 4,490.00
• 4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $ 2550.00
• 3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $ 2410.00
• 4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $ 1,715.00
• Taper Attachment (Factory order) 991126 -22 $ 3155.00
• Installation of taper attachment net $ 760.00
• Drill & Arbor (JACOBS) 22/30B-D/A $ 770.00
• Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $ 2,480.00
• Live Center – Royal (Dual Bearing) MT#5 10855 $ 445.00
• Live Center – MT#5 LC-MT5 $ 200.00
• 5C Lever Collet Closer ( Altas) CCD1-11 $ 2,215.00
• 5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $ 340.00
• Micrometer Carriage Stop 20C-02 $ 290.00
• Steady Rest 12” ( 3.2”- 10.6”) 22B-STEADY12 $ 1,870.00
• Steady Rest 15” ( 6.7” – 15.2”) 22C-STEADY15 $ 2,230.00
• Roller Jaws Set (3 pcs) 26C-RJAW $ 1,090.00
DIGITAL READ OUT SYSTEMS:
• Fagor 20i D.R.O. FG-2280 $ 3,145.00
• Fagor 40i D.R.O. FG-40i-2280 $ 4,085.00
• Acu-Rite 200S D.R.O. for 2280B, 2680B, 3080B AR-2680 $ 4,330.00
• Newall DP700 D.R.O. for 2280B, 2680B, 3080B NWDP-2680 $ 4,380.00
Factory Installation - D.R.O. $ 790.00 NET
| Swing | 22" |
| Centers | 80" |
| Spindle Bore | 4.5" |
| Power | 15 hp |
| RPM | 0 RPM |
| Swing Over Cross Slide | 13.2" |
| Dimensions | 137”L x 41”W x 50”H |
| Weight | 6,380 lbs |
SPECIFICATIONS:
Capacity
• Swing Over Bed: 22”
• Swing Over Cross Slide: 13.2”
• Center Height: 11”
• Swing Over Gap: 31”
• Distance Between Centers: 80”
Headstock
• Spindle Nose Type: D1-11 Camlock
• Spindle Bore: 4.5”
• Spindle Speeds (12): 10-1,000 rpm
• Taper of Spindle Bore: MT#7
• Taper of Center: MT#5
Threads and Feeds
• Longitudinal Feeds – in/rev (18): 0.0022” - 0.032”
• Cross Feeds – in / rev {#}: 0.0026’ –0.035” {17}
• Inch Threads (#): 2-56 tpi {44}
• Metric and Module Threads {#}: 0.5-14mm {24}
• D.P. Threads (36): 4-56 mm
• Leadscrew Pitch, Diameter: 4 tpi, 1-1/2”
Carriage
• Cross Slide Travel: 14.75”
• Compound Rest Travel: 8”
• Compound Width: 6”
Bed
• Bed Width: 15-3/4”
• Bed Length: 103.5”
Tailstock
• Quill Travel (graduated): 6-1/2”
• Quill Diameter: 3”
• Quill Taper: MT#5
General
• Spindle Motor (220V or 440V, 60, 3): 15 hp
• Net Weight (approx.): 6,380 LBS
• Dimensions (L x W x H): 137” x 41” x 50”
• Standard Color: Gray
Specifications may be changed or improved without notice.
Electrical:
• Voltage: 230 & 460
• Phase: 3 phase
Total Power Consumptions
• 230V 16KVA/45 amps
• 460V 16VA/22.5 amps