WILLIS Model RD-1300H Radial Drill Press

WILLIS Model RD-1300H Radial Drill Press
Willis radial arm drills include hardened and ground steel gears that run in an oil bath
These radial drilling machines incorporate a spindle and quill made from hardened and ground alloy steel
Spindle return tension is easily adjustable on our radial drills through a well-built return spring
A Double wall column with an oversize bearing provides easy rotation and maximum stiffness on all Willis radial arm drilling machines
Power-feed rates on these radial machines are easily selected and can be changed while spindle in running
Limit switches on our radial arm drilling machines are used to prevent over travel with power-feed
The radial arms are raised and lowered by a separate motor with safety nut for operation safety
Limit switches prevent radial arm over travel
Hardened steel wear strips for top of arm ways allow for smooth head travel
A Flood coolant system is provided on all Willis radial arm drills
Box tables with T-slots on both top and side surfaces are also standard on Willis radial arm drills
Fluorescent work light is provided
Toolbox, tools, and operator/parts manual is also provided on all Willis radial arm drilling machines

Willis RD1300H Radial Drilling Machine

• Totally enclosed drill head with oil bath and forced lube pump delivering oil to all the proper places
• Double column for maximum rigidity
• Hardened and ground alloy steel gears
• Heavily reinforced and ribbed base
• Hydraulic clamping for drill head, arm, and column
• Box table, flood coolant, fluorescent work light standard

51 inch arm
2 inch drilling capacity
20 inch x 25 inch x 17 inch H box table
7.5 HP spindle drive motor
36 inch horizontal drill head travel
27 inch vertical arm travel
44-1500 RPM's
12 spindle speeds
Hydraulic clamping for drill head and arm rotation
Spindle feeds: 3 steps (0.004 inch ~ 0.024 inch)/rev