BAYKAL APHS-COMPACT CNC PRESS BRAKE 66TON X 6' ESA 630 2D CONTROL X & R BACKGAUGE
Press BrakesBAYKAL APHS-COMPACT CNC PRESS BRAKE 66TON X 6' ESA 640 2D CONTROL Y1,Y2,X & R BACKGAUGE
Standard features:
Installation and start-up training
One-year parts and labor warranty
XR two axis back gauge, with two back gauge fingers
ESA 640 controller
One seat of offline programming software
Mechanical crowning system
AKAS Manual safety system
Starter tool set
Safety interlocked side and rear doors
Two front support arms on linear guides
The APHS COMPACT is manufactured by Baykal, an ISO 9001 manufacture in an ultra modern state of the art manufacturing facility. These machines go through an extensive manufacturing process, using the latest technology. In addition, Baykal uses the highest quality material available, the frame members processed out of certified ST44-2 steel, roll straightened, and stress relieved prior to any welding. This assures our components are of the highest quality and that machined tolerances remain stable throughout the life of the machine. All the Baykal machines are machined in one handling on large bridge style CNC mills to assure exact tolerances.
STANDARD FEATURES
✓ Welded, Monoblock steel frame for minimum deflection under load
✓ Y1 / Y2 Dual cylinder down stroking machine with +/- .0004” repeatability
✓ One-piece forged cylinders precision machined and honed for high accuracy
✓ Cylinders are keyed interlocked and bolted to side frame for zero backlash
✓ Bed referenced, precision linear GVI Misure scales assure accurate ram position measurement with repeatability of +/- .0004”
✓ Cartridge valves are mounted in a single, steel manifold block to reduce heat and wear. The simplicity and reduction of pipe connections minimize leaks
✓ Full flow, full pressure in-line filter attached to pump ensures optimum oil cleanliness and trouble-free operation of all hydraulic components
✓ Electrically interlocked, swing away throat guards
✓ Electrically interlocked, rear sliding door prevents access to back area
✓ The standard punch holder is a universal American / European top tool holder with side-to-side adjustable wedges.
✓ Wired electrical box with ventilation
✓ Standard controller is the ESA S640
✓ AKAS manual safety system
✓ Starter tool set of lower 4 way die and upper segmented gooseneck punch
✓ 39-inch AC Servo driven XR back gauge with two heavy duty finger assemblies
✓ Baykal Mechanical crowning system
✓ Y1, Y2, X, R for a 4 Axis system
✓ Set of front support arms, mounted on a linear guide, running the entire bed length. A hand wheel driven acme screw running thru a brass nut, provides lateral adjustment. Flip stops (2) are provided for front gauging
✓ CNC CONTROL SYSTEM
The ESA S 640 Touchscreen CNC servo control is a pendant mounted control that is user friendly and easily visible with its large 15” display. The fill in the blank format makes even the most inexperienced operator proficient in a matter of hours. This control is a multi-axis (up to 6 axis), 2D color display with graphical features.
Some ESA S640 key features are as follows:
15.6” TFT LCD display with 1366x768 WSVGA resolution, glare protection
Automatic calculation of the bending force limitation based on the max. load capacity of the tools.
Automatic calculation of the crowning
Automatic calculation of the bending radius curvature for large bend radii
Programmable workpiece counter
Switch between inch / mm
Windows like user interface
Network connection / remote maintenance
2X RS-232
1X Ethernet 10/100 Mbit network connection
1X CANopen
2X USB 2.0
Free seat of offline programming software for Windows
Complete bending simulation
Dual palm buttons mounted on stand with dual foot pedals & “E” stop
BACK GAUGE SYSTEM XR TWO AXIS
Manufactured out of heavy section, tubular steel, the APHS COMPACT series of machines come equipped with an exceptional quality, XR two axis back gauge. The dual, back gauge drives are mounted directly to the side frames for rigid stability and are driven by high torque, AC servo motors. A geared belt provides a smooth, quiet transmission of power to each of the (2) two precision ball screws. A set of heavy-duty flip finger assembly’s ride smoothly along the gauge bar via a precision, linear bearing. Vertical, up/down finger movement is accomplished by the CNC controller. Micro adjustment (in/out.) of each finger is also provided.
Specification as follows: X Axis (CNC) R Axis (CNC)
Range 39.3 inches 6.3 inches
Speed of travel 826”/min 567”/min
Positioning accuracy +/- .001” +/-.002”
Tonnage | 67 T |
Type | HYD |
Overall Length | 82.67" |
Between Housings | 62" |
Stroke | 8.2" |
# Axis | 4 |
Control | CNC (ESA 640 2D) |
Dimensions | 121"L x 62"W x 100"H |
Weight | 11,880 lbs |
Specifications: Inch Metric
Bending capacity (tons) 66 60
Overall bed length 6'10" 2100 mm
Distance between housings 5'3" 1600 mm
Open Height above bed 18.7" 475 mm
Stroke length 8.2" 210 mm
Closed height 10.5" 265 mm
Operating speeds
Advanced: 354 “/min. 150 mm/sec.
Pressing (variable): 24 “/min. 10 mm/sec.
Return: 307 “/min. 130 mm/sec.
Throat depth 16" 410 mm
Bed height above floor 34.6" 880 mm
Bed projection below floor 0" 0 mm
Motor 7 HP 5.5 KW
Oil tank capacity 36 Gallons 140 Liters
Shipping dimensions Inch Metric
Height: 100" 2542 mm
Left to right: 121" 3073 mm
front to back: 62" 1580 mm
Weight: 11,880 lbs. 5,400 kg.