New
SHARP Vertical & Horizontal Mill Model VH-3, 5 HP Vert Spindle; 7.5HP Horiz. Spindle
Vertical & Horizontal Mills
SHARP Vertical & Horizontal Mill Model VH-3, 5 HP Vert Spindle; 7.5HP Horiz. Spindle
FEATURES:
Super Heavy Duty Constructions
5HP, NST #40 Vertical Spindle
7.5HP, NST #50 Horizontal Spindle with 12 Speeds (35-1,382 RPM)
Vertical Head has Lever Control For/Rev For Tapping,
Separate Lever Control for “2-Direction” Boring
Massive Hardened & Ground Boxways Throughout
3-Axis Simultaneous Power Feeds with Rapid Traverse
STANDARD EQUIPMENT:
Unique Double Box Way Design on Knee
Three-Axis Simultaneous Feed and Rapid Traverse
Cross-feed Leadscrew is mounted in Middle of Knee
Pressurized Auto Lube System
Metal Casting Tray at each end of Table
Box Type Column Way
Coolant System
Electro-Magnetic Spindle Brake
Chip Pan
1-1/4” Diameter Horizontal Arbor with 2 Arbor Supports
Tool Kit
Machine Manual Half Nut Wrench 17m & 19m, set of 6 Allen Wrenches, Philip Screw Driver, Flat Head Screw Driver, Oil Can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, & Can of Paint.
OPTIONAL ACCESSORIES:
Power Draw Bar( vertical operation)
Align Power Draw Bar w/Foot Pedal Control PD-150FP-V $1145.00Power Draw Bar( Horizontal operation)
Align Power Draw Bar w/Foot Pedal Control PD-150FP-H $1145.00“Maxi Torque Rite” Power Draw Bar TR-100 $ 965.00
Factory installation NET $ 200.006” “Kurt” Vise with Swivel Base D688 5000-2126A $ 1185.00Clamping Kit (52 pcs/steel rack) CK-104 $ 250.00Halogen Work Light WL-110V55W $ 265.00Swivel table +/- 45 degree $ 2480.00Extended table to 1500 mm x 300 mm ( 59” x 11.8”) $ 2120.00
380 V transformer, 15 KVA $ 2085.00 net
NFPA 79 upgrade $ 3500.00 net
DIGITAL READOUT SYSTEMS:
Fagor D.R.O.
2-Axes (20i) FG-VH $2,500.003-Axes on Quill (30i) FG-VH-3AQ $3,050.003-Axes on Knee (30i) FG-VH-3AK $ 5,300.00Acu-Rite 200S DRO
2-Axes AR-VH $ 2,540.003-Axes on Quill AR-VH-3AQ $ 3070.003-Axes on Knee AR-VH-3AK $ 3,215.00Newall DP700 DRO
2-Axes NWDP-VH $ 2025.003-Axes on Quill NWDP-VH-3AQ $ 2,720.003-Axes on Knee NWDP-VH-3AK $ 2,720.00Factory Installation - DRO
2 - Axes DRO $ 855.00 NET3 - Axes DRO $ 1030.00 NET
| Table Size-W | 12" |
| Table Size-L | 51.2" |
| Dimensions | 107" x 90" x 95.25"H |
| Weight | 5,830 lbs |
SPECIFICATIONS:
Table
Table Working Area 51-3/16” x 11- 13/16” T-Slot (Normal size x No. x Pitch) 5/8” x 3” x 2-3/4”
Travel 37-3/8” x 14-13/16” x 18-1/2” Feeds (12 step): Vertical ¼ to 12-7/16 ipmLong & Cross ½ to 24-7/8 ipm Rapid Traverse Vertical 59-13/16 ipmLong & Cross 116-1/2 ipm Vertical Spindle
Spindle Taper NST#40
Spindle Speed (infinitely variable) 120 to 3,600 rpm Spindle Nose to Table Surface 5-1/8” to 23-5/8”
Spindle Nose to Column Surface 3-7/8” to 24-1/8”
Quill Feed (3) .0019, .0038, .0076 ipr
Quill Travel 5-1/8”
Quill Diameter 4.6”
Swivel angle of head (left & right) 45 degrees
Cross Travel of Arm 20-1/16”
Horizontal Rotation of Overarm 360 degrees
Horizontal Spindle
Spindle Taper NST#50
Spindle Speed (12 steps) 35 to 1,382 rpm Spindle to Overarm 7-1/8”
Spindle to Table 7/8” to 19-3/8”
Motors
Vertical Spindle 5 HP
Horizontal Spindle 7.5 HP
Table Feed and Rapid Traverse 3 HP
Coolant Pump 1/8 HP
General
Machine Height 95-1/4”
Floor Area 107” x 90”
Net Weight (approx.) 5,830 LBS
Specifications may be changed or improved without notice.
Electrical:
Voltage 220 & 440 / 3ph