DOALL VERTICAL TILTING BANDSAW MODEL 3613-V3 36" x 13"Capacity
Vertical Band SawsDOALL VERTICAL TILTING BANDSAW MODEL 3613-V3 36" x 13" Capacity
DoALL manufactures sawing machines, blades, cutting fluids, and material handling systems. It offers band saw blades, including bi-metal, carbide, diamond, carbon, and knife-edge blades; sawing machines for high production, general-purpose, miter cutting, vertical contour, and custom engineered sawing solutions
• Table tilt to 45 degrees negative - 10 degrees positive.
• Manual band tension with indicator.
• 20" Aluminum bandwheels with crowned rubber tires.
• Post elevating hand wheel.
• Upper wheel adjustment 3"
• Chip box
• Operator controls mounted on column.
• Chip blower (plant air required)
• One set of high speed, insert type guide blocks for bands 1/8" to 1/2" • Saw blade guards.
• Band door interlocks.
• One set of steel guide inserts for bands 1/4", 3/8", 1/2" • Operation and parts manuals on USB stick.
• Band wheel brush
• Recommended job selector
• Variable frequency band drive.
• One (1) complimentary DoALL Bi Metal saw blade.
• Work light
• Insert setting gages with wrench and trunnion wrench
Throat Cap | 36" |
Work Height | 13" |
Power | 3 hp |
Blade Width | 1" |
Blade Length | 199" |
FPM | 550-5500 |
CAPACITY
Max. Width 36"; Max. Height 13"
Positive Table Tilt 10 degrees
Negative Table Tilt 45 degrees
Saw Blade:
Band Width Capacities: 1/8" to 1"
Blade Length: 199"
Band Drive:
Motor HP 3 HP
Band Speed Low range 30-320 fpm
High range 550-5500 fpm
Band Tension: Manual
Coolant System: Flood NO / Mist Lubricator OPT
Floor Space Dimensions: W x L X H 39" x 81" x 82"
Material Pass Height 39"
Machine Weight 1,550 lbs.
Electrical
Voltage Requirement 208V, 230V or 460V-60Hz-3ph Wye configuration (Must Specify at Order Placement)
Total Amp Draw: (FLA) 10.7(208) 10.7(230) 5.3(460)Amps