FINN POWER SWAGER Model P20MS
SwagersFINN POWER SWAGER Model P20MS
Finn-Power was originally formed in 1969. Hydraulic hose crimping and cutting machines were the first products manufactured by the company under the trade name Finn-Power. Each year Lillbacka Powerco Oy manufactures thousands of portable, benchtop and production model crimping machines, as well as hose cutting and nut crimping machines. Approximately 95% of Powerco’s production is exported through an international distributor network to more than 60 countries from the company’s factory in Finland.
Finn-Power crimping machines are produced by Lillbacka Powerco with 50 years of manufacturing experience of crimping machines. Finn-Power products have been developed to meet the requirements in a variety of different industries. They are used globally in such industries as hydraulic hoses, automotive components, construction equipment, heavy machinery, railroad, marine, electric power transmission, industrial hoses and tube, pipe, wire and cable industry, etc.
Finn-Power has offered the highest quality thanks to the many years of experience in product design, engineering, development and manufacturing. Finn-Power machines meet the requirements of various different industries. Finn-Power crimping machines have literally hundreds of applications in the following industries: hydraulic hose assemblies, tube, pipe, wire, cable, plastic and fiberglass.
OPTIONAL EQUIPMENT
Selecting the die set P20, P21
Use only original Finn-Power die sets in Finn-Power crimping machines.
Refer to the fitting manufacturer's specifications for proper crimping diameter for the fitting.
Each die set has its own crimping range. Follow it to assure the roundest possible crimping result.
The minimum crimping diameter D is marked on each die set.
Example: with die set No 18013/10 the minimum crimping diameter is 10 mm.
D L Die set No Crimping range
10 55 18013/10 10...12 mm
12 55 18013/12 12...14 mm
14 55 18013/14 14...16 mm
16 55 18013/16 16...19 mm
19 55 18013/19 19...23 mm
23 55 18013/23 23...27 mm
27 70 18013/27 27...31 mm
31 70 18013/31 31...36 mm
36 75 18013/36 36...41 mm
41 75 18013/41 41...47 mm
47 85 18013/47 47...54 mm
54 85 18013/54 54…61 mm
In addition to the standard die sets, a wide range of special die sets is available on request.
Capacity | 1.5" |
Power | 5 hp |
Technical data P20 3-phase 1-phase
Capacity in 1 ½ 1 ½
Crimping diameter range *) Ø (mm) 4...61 4...61
Max opening mm 25 25
Pump l/min 8 2.8
Max pressure bar 275 275
Crimping force kN 1370 1370
Theoretical production capacity per hour 850 250
Sound pressure level dB(A) 71 71
Enclosure class IP 54 IP 54
Closing speed of master dies mm/s 2.5 1
Frequency 60 Hz
Motor power kW 3.6 1.5
Voltage V / Current A / Fuse A 210 / 15.6 / 25 230 / 12.5 / 16
230 / 10.8 / 20 / /
400 / 6.2 / 16