SHARP Radial Arm Drill Model RD 2500
Radial Drills
SHARP Radial Arm Drill Model RD 2500
FEATURES:
Hardened and Ground Arm slide ways, gears
Arm Elevation is controlled by Hydraulic Motor
Safety Device prevents arm from dropping even when copper nut is worn
Clutch device to protect spindle and spline from damage upon overloading
Power tool release (tool knockout) for easy tool change
Hydraulic preset for spindle speed change
Counter balanced spindle (with casting) increases durability
Spindle depth setting with automatic kick out
T-Slots and Drain Channels on table and base casting
Auto reverse tapping function
22” column diameter
MT#6 spindle
10 HP motor
98” column to spindle center
Drilling : 3.9” cast iron, 3.1” steel
Boring : 8.2” cast iron, 6.5” steel
Hardened and ground arm slide ways and gears
Double tube column design to increase rigidity
Arm elevation controlled by electric motor
Built-in automatic tool ejector
Safety device prevents arm from dropping even when bronze nut is worn out
T-slots and drain channels on box table
Box table
Coolant system
Auto spindle reverse for tapping
Work light
Tool box
STANDARD EQUIPMENT:
Box Table
Coolant System
Worklight
Toolbox
Wired 220V or 440V. Please Specify.
OPTIONAL ACCESSORIES:
Tilting Table 32” x 28” x 24” RD1230-TILT $13,330.00
CSA parts upgrade and guarding net $ 5,075.00
CSA compliance certificate by CSA Group in Los Angeles net $ 4,535.00
| Arm Length | 98.42" |
| Column Dia. | 21.65" |
| Power | 10 hp |
| RPM | 1,250 RPM |
| Dimensions | 138.58”L x 55.12”W x 167.1H" |
| Weight | 24,200.Lbs. |
SPECIFICATION:
Diameter of column 21.65"
Distance from column surface to spindle center, max. 98.42"
Distance from column surface to spindle center, min. 19.68"
Travel of spindle head 78.74"
Distance from base surface to spindle end, max. 78.74"
Distance from base surface to spindle end, min. 21.65"
Elevating height of arm 39.37"
Effective area of table 39.37” x31.49” x22.04"
Dimensions of base 138.58” x 55.12”x 12.60"
Taper hole in spindle MT#6
Stoke of spindle 17.72"
R.P.M. of spindle (rpm range x steps) 16-1250 x 16 Steps
Feed of spindle (rev.teps) 0.0016-0.126” x 16 Steps
Main motor (HP) 10 HP
Elevating motor (HP) 5 HP
Coolant Equipment (HP) ¼ HP
Machine height from floor (max) 157.09”
Base + column height 151.57”
Net weight (approx) lbs 24,200.Lbs.
Shipping weight (approx) lbs 27,500.Lbs.
Shipping dimensions (LxWxH) 157.48 x 63” x 151.57”
Capacity Drilling Steel 3.15”
Capacity Drilling Cast Iron 3.94”
Capacity Tapping Steel 2.56”
Capacity Tapping Cast Iron 2.94”
