Ohtori FTD500iHV 5 axis machining center with Turm\ning

Ohtori FTD500iHV 5 axis machining center with Turning 5-axis vertical machining center with turning function actualize maximum machining efficiency Milling spindle and turning tool post are in independent and exclusive structure. B-axis :Direct drive motor C-axis: 2,000 min-1 built-in spindle motor. High-precision machining under non-backlash. High accessibility by ergonomic design enables excellent workability. Numerous Spare Parts X/Y/Z-axis travel 32.28"/19.69"/21.65" B-axis tilting angle ＋100℃～－100℃ C-axis tilting angle 360° Distance between spindle center and table center (X-axis right and left,table horizontal) 17.72"～－14.57" Distance between spindle center and table center (Y-axis front and back,Both table horizontal and vertical)-9.8"～9.8" Distance from table top to spindle end (Z-axis up and down,table horizontal) 0～21.65" Distance from table top to turning tool post end (Z-axis up and down,table horizontal) 1.22"～22.87" Size of working surface φ15.75" Permissible mass of workpiece(center) 330 lbs Table working surface conifiguration T-slots 14H8×5 Height from floor to table top 1,240mm48.82" Spindle speeds 100～15,000min-1 100～20,000min-1(OP) Spindle nose(Nominal size,No.) BT40 B 50min-1 C(milling mode) 18,000deg/min(50min-1) B 1～40min-1 C(milling mode) 1～18,000deg/min(0.03～15min-1) C(turning mode)30～2,000min-1 Motor Spindle motor High speed 10min/30min continuous 25HP/20HP/15HP Low speed continuous 10HP C-axis motor(Built in spindle) 15min／continuous 34kW/31kW Feed motors X-axis AC 4kW Y-axis AC 4kW Z-axis AC 7kW B-axis AC 8.1kW ATC tool storage capacity 32tools Height machine 121.85" Floor space 137"× 128.2" Machine weight 27,500 lbs Controller FANUC Series 31i Power Requirement 91 KVA