Phone: 1+847-571-0523
Menu
Advanced Filters
Category
Subcategory
Manufacturer
Model
Condition
Used Rebuilt 2003 TSUNE CNC Cold Saw Model TKSC 101GL, 4.3"Capacity, with Barfeed
Details
Rebuilt 2003 TSUNE CNC Cold Saw Model TKSC 101GL, 4.3"Capacity, with Barfeed
Get Financing
Used MARVEL/SPARTAN Hercules Model S-330/2 mitering, horizontal bandsaw.12" x 18"
Details
MARVEL/SPARTAN Hercules Model S-330/2 mitering, horizontal bandsaw.12" x 18"
Get Financing
Used 1980 LEBLOND REGAL SERVO-SHIFT Engine Lathe, RAISED by factory, 36" Swing, 28.25" Swing over Cross Slide
Details
1980 LEBLOND REGAL SERVO-SHIFT Engine Lathe, RAISED by factory, 36" Swing, 28.25" Swing over Cross Slide
Get Financing
Used 1971 36" x 20'cc LEBLOND Engine Lathe, Model Regal
Details
1971 36" x 20'cc LEBLOND Engine Lathe, Model Regal
Get Financing
Used 2011 LUCAS PBM 1640 CNC PLANO MILLING MACHINE Table Dims 63”x157"; 165" X-Axis Travel; 40-6,000 RPM; Siemens 840D.
Details
2011 LUCAS PBM 1640 CNC PLANO MILLING MACHINE Table Dims 63”x157"; 165" X-Axis Travel; 40-6,000 RPM; Siemens 840D.
Get Financing
Used 2015 HNK Vertical Turret Lathe NT 6080 with FANUC 31i-A, Built in 2015 but never used. 236" Table, Swing 314.9"
Details
2015 HNK Vertical Turret Lathe NT 6080 with FANUC 31i-A, Built in 2015 but never used. 236" Table, Swing 314.9"
Get Financing
Used HYD-MECH Model 23A, Programmable up to 100 jobs, On demand hydraulics, Overhead bundle clamping
Details
HYD-MECH Model 23A, Programmable up to 100 jobs, On demand hydraulics, Overhead bundle clamping
Get Financing
Used 2011 DOOSAN LYNX 300M Live Tool CNC Lathe, 10" Chuck 3" bar capacity, 5HP live tools
Details
2011 DOOSAN LYNX 300M Live Tool CNC Lathe, 10" Chuck 3" bar capacity, 5HP live tools
Get Financing
Used 2012 DOOSA PUMA 2100MS Live Tool CNC Lathe, 8" Chuck on Main; 6" Chuck on Subspindle
Details
2012 DOOSA PUMA 2100MS Live Tool CNC Lathe, 8" Chuck on Main; 6" Chuck on Subspindle
Get Financing
Used 2011 DOOSAN LYNX 300 Lathe, 10" 3 Jaw Chuck, Tailstock, 25.6" Swing
Details
2011 DOOSAN LYNX 300 Lathe, 10" 3 Jaw Chuck, Tailstock, 25.6" Swing
Get Financing
Used 2019 DOOSAN DNM 4500 Vertical Machining Center
Details
2019 DOOSAN DNM 4500 Vertical Machining Center
Get Financing
Used DAITO Horizontal Bandsaw Model S8010 Round Capacity 31"
Details
DAITO Horizontal Bandsaw Model S8010 Round Capacity 31"
Get Financing
Used 2006 MIGHTY VIPER Model VMC-B4000GTDW CNC Twin Spindle Bridge Mill (IN STOCK)
Details
2006 MIGHTY VIPER Model VMC-B4000GTDW CNC Twin Spindle Bridge Mill (IN STOCK)
Get Financing
Used WEBSTER & BENNETT MODEL 72 Vertical Boring Mill
Details
WEBSTER & BENNETT MODEL 72 Vertical Boring Mill
Get Financing
Used 2017 W.F. WELLS Horizontal Twin Column Mitering saw with Swivel Base
Details
2017 W.F. WELLS Horizontal Twin Column Mitering saw with Swivel Base
Get Financing
Used Manual TOS W100A Horizontal Boring Mill 4" Spindle, Rebuilt 2022, HEIDENHAIN DRO 5 axis scales. Hyd tool clamping. Tailstock Price includes shipping, installation & Warranty. .
Details
Manual TOS W100A Horizontal Boring Mill 4" Spindle, Rebuilt 2022, HEIDENHAIN DRO 5 axis scales. Hyd tool clamping. Tailstock Price includes shipping, installation & Warranty. .
Get Financing
Used WF Wells Model B-25-3C with 6 degree cant, 22" x 40" Twin Column Hydraulic
Details
WF Wells Model B-25-3C with 6 degree cant, 22" x 40" Twin Column Hydraulic
Get Financing
Used TOS VARNDORF Table Type 5.3" HBM Model WHN 13P 137.8" X-axis, 78.7" Y-axis, 49.2" Z-Axis, Rebuilt
Details
TOS VARNDORF Table Type 5.3" HBM Model WHN 13P 137.8" X-axis, 78.7" Y-axis, 49.2" Z-Axis, Rebuilt
Get Financing
Used TOS SKJ20A VERTICAL BORING MILL
Details
TOS SKJ20A VERTICAL BORING MILL
Get Financing
Used TANNEWITZ Model G1NE Vertical Bandsaw, 35" x 20" Variable Speed Bandsaw
Details
TANNEWITZ Model G1NE Vertical Bandsaw, 35" x 20" Variable Speed Bandsaw
Get Financing
Used TANNEWITZ GVTNE Vertival Bandsaw, Throat 36"; Max Work Height 20"
Details
TANNEWITZ GVTNE Vertival Bandsaw, Throat 36"; Max Work Height 20"
Get Financing
Used TOS VARNSDORF Model W100A Horiz. Boring Mill, 4" Spindle, Travels 63 in X-axis, 44 in Y-axis, 49 in Z-axis, 35 in W-axis
Details
TOS VARNSDORF Model W100A Horiz. Boring Mill, 4" Spindle, Travels 63 in X-axis, 44 in Y-axis, 49 in Z-axis, 35 in W-axis
Get Financing
Used 2011 STANDARD INDUSTRIAL Press Brake Model AB-400 Ton 12', Flush Floor Mount, Tooling
Details
2011 STANDARD INDUSTRIAL Press Brake Model AB-400 Ton 12', Flush Floor Mount, Tooling
Get Financing
Used TANNEWITZ G1E
Details
TANNEWITZ G1E
Get Financing
Used SUN FIRM CST 42 Series Hollow Spindle CNC Flat Bed Teach Lathe with FANUC 0iTF, 2-3 months for delivery
Details
SUN FIRM CST 42 Series Hollow Spindle CNC Flat Bed Teach Lathe with FANUC 0iTF, 2-3 months for delivery
Get Financing
Used RAMBAUDI 5 AXIS Heavy Double Column CNC Gantry Bridge Mill with Articulating Head
Details
RAMBAUDI 5 AXIS Heavy Double Column CNC Gantry Bridge Mill with Articulating Head
Get Financing
Used Used O-M TMS 30/70 Vertical Turret Lathe; 118" Table, 276" Swing, 112" Under the Rail
Details
Used O-M TMS 30/70 Vertical Turret Lathe; 118" Table, 276" Swing, 112" Under the Rail
Get Financing
Used USED 2008 Mighty Viper DZ-3240 Bridge Mill, Travels 120˝ X x 94˝ Y x 42˝ Z, 6,000 rpm (IN STOCK)
Details
USED 2008 Mighty Viper DZ-3240 Bridge Mill, Travels 120˝ X x 94˝ Y x 42˝ Z, 6,000 rpm (IN STOCK)
Get Financing
Used OOYA 4' Radial Drill Model RE2-1300A, 13 5/8" column
Details
OOYA 4' Radial Drill Model RE2-1300A, 13 5/8" column
Get Financing
Used 2012 OKK HM 1250 CNC Horizontal Machining Center, FANUC 31i, 49.2" x 49.2" Pallets, 4 Axis
Details
2012 OKK HM 1250 CNC Horizontal Machining Center, FANUC 31i, 49.2" x 49.2" Pallets, 4 Axis
Get Financing
Used 2013 NAXOS CNC Multi-Axis Cycle Cylindrical Grinder with Two Workheads, 24.78" x 191"
Details
2013 NAXOS CNC Multi-Axis Cycle Cylindrical Grinder with Two Workheads, 24.78" x 191"
Get Financing
Used 2012 MARVEL SPARTAN Model PS 2828/10 Plate Saw
Details
2012 MARVEL SPARTAN Model PS 2828/10 Plate Saw
Get Financing
Used MARVEL/SPARTAN PS2828/10 Plate Saw, Cutting Height 27.5"; Cutting Width 118"
Details
MARVEL/SPARTAN PS2828/10 Plate Saw, Cutting Height 27.5"; Cutting Width 118"
Get Financing
Used Used 1998 HYD-MECH V-18APC-60 | Vertical Band Saws
Details
Used 1998 HYD-MECH V-18APC-60 | Vertical Band Saws
Get Financing
Used 2015 Retrofit CNC KING Vert. Boring Mill with Fagor 8065 TC Cntrl & Motor, 72" Under Rail, 90" 4-Jaw
Details
2015 Retrofit CNC KING Vert. Boring Mill with Fagor 8065 TC Cntrl & Motor, 72" Under Rail, 90" 4-Jaw
Get Financing
Used 1998 KURAKI Model KHM 125 Horizontal Machining Center w/ 50" x 50" pallets
Details
1998 KURAKI Model KHM 125 Horizontal Machining Center w/ 50" x 50" pallets
Get Financing
Used 10" X 20" KENT #KGS-1020AHD-1 HORIZONTAL SURFACE GRINDER
Details
10" X 20" KENT #KGS-1020AHD-1 HORIZONTAL SURFACE GRINDER
Get Financing
Used HEM saw Model WF 190A-DC Capacity 25" x 44" Automatic, Dual Column, , 24" Roller Discharge, Optional Top Clamp, Bi-Directional Outboard Powered Vise on Feed Table
Details
HEM saw Model WF 190A-DC Capacity 25" x 44" Automatic, Dual Column, , 24" Roller Discharge, Optional Top Clamp, Bi-Directional Outboard Powered Vise on Feed Table
Get Financing
Used HANKOOK CNC VTL Model VLC 30/70 w/ 24 ATC, & C axis & live tools, Under Power, 2016 Refurb
Details
HANKOOK CNC VTL Model VLC 30/70 w/ 24 ATC, & C axis & live tools, Under Power, 2016 Refurb
Get Financing
Used HYD-MECH M 16A 16" X 25" Automatic Horizontal Pivot Type Bandsaw
Details
HYD-MECH M 16A 16" X 25" Automatic Horizontal Pivot Type Bandsaw
Get Financing
Used HYD-MECH Model H16A FULLY AUTOMATIC, 1.5" Blade, Column-Type Bandsaw W/ Hyd-Mech PLC Control, 8,500 lbs, Bundling Clamps, Full travel vises
Details
HYD-MECH Model H16A FULLY AUTOMATIC, 1.5" Blade, Column-Type Bandsaw W/ Hyd-Mech PLC Control, 8,500 lbs, Bundling Clamps, Full travel vises
Get Financing
Used 2013 HWACHEON HL 580 GAP ENGINE LATHE, 23" X 60", Newall 2 axis DRO
Details
2013 HWACHEON HL 580 GAP ENGINE LATHE, 23" X 60", Newall 2 axis DRO
Get Financing
Used HEM Model V130HM Vertical Double Miter Bandsaw. Can be seen under power in IL. 20" x 24" capacity, 45 degrees L & R
Details
HEM Model V130HM Vertical Double Miter Bandsaw. Can be seen under power in IL. 20" x 24" capacity, 45 degrees L & R
Get Financing
Used 2006 HANKOOK Protec 9NC X 4000 WITH 10" Bar Capacity, 160" Centers, (2)- 25" Manual Chucks, FANUC 21iTB Run Time Hours 6,069
Details
2006 HANKOOK Protec 9NC X 4000 WITH 10" Bar Capacity, 160" Centers, (2)- 25" Manual Chucks, FANUC 21iTB Run Time Hours 6,069
Get Financing
Used Hwacheon Mega T130 Big Bore Heavy Duty CNC Lathe
Details
Hwacheon Mega T130 Big Bore Heavy Duty CNC Lathe
Get Financing
Used DAITO High Speed Drill for Structural Steel Model SDNFC 050 40" X 20" Capacity, 3 Spindles
Details
DAITO High Speed Drill for Structural Steel Model SDNFC 050 40" X 20" Capacity, 3 Spindles
Get Financing
Used 2014 FERMAT WFT 13R CNC 5.1"HBM w/ Heidenhain TNC 530 Control, Travels X=78.7", Y- 78.7", Z- 59.1"
Details
2014 FERMAT WFT 13R CNC 5.1"HBM w/ Heidenhain TNC 530 Control, Travels X=78.7", Y- 78.7", Z- 59.1"
Get Financing
Used 2013 HANKOOK Protec 9NC X 3000 WITH 10" Bar Capacity, 120" Centers, (2)- 25" Manual Chucks, FANUC 32iTB Run Time Hours 9,738
Details
2013 HANKOOK Protec 9NC X 3000 WITH 10" Bar Capacity, 120" Centers, (2)- 25" Manual Chucks, FANUC 32iTB Run Time Hours 9,738
Get Financing
Used HANKOOK VTC140E Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools
Details
HANKOOK VTC140E Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools
Get Financing
Used 2007 FERMAT VLC 1600 ATC+C VERTICAL TURRET LATHES WITH SINGLE COLUMN
Details
2007 FERMAT VLC 1600 ATC+C VERTICAL TURRET LATHES WITH SINGLE COLUMN
Get Financing
Used 2012 FERMAT MODEL WFT 13 HORIZONTAL BORING MILL: Travels X=196.8", Y=137.8", Z=78.7"
Details
2012 FERMAT MODEL WFT 13 HORIZONTAL BORING MILL: Travels X=196.8", Y=137.8", Z=78.7"
Get Financing
Used ELUMATEC SBZ130, 3 Axis Profile Machining Center, Turret w/8 tools, German Engineering
Details
ELUMATEC SBZ130, 3 Axis Profile Machining Center, Turret w/8 tools, German Engineering
Get Financing
Used 2008 DOOSAN HBM Model DBC 130CX: Travels X= 118.1", x Y= 78.7" ,x Z= 62.9", 40 ATC, BT 50
Details
2008 DOOSAN HBM Model DBC 130CX: Travels X= 118.1", x Y= 78.7" ,x Z= 62.9", 40 ATC, BT 50
Get Financing
Used DOOSAN PUMA Model V8300 Vertical Turret Lathe, 24" Chuck, Max Turning Diameter 32.7", Turning Ht. 29.5"
Details
DOOSAN PUMA Model V8300 Vertical Turret Lathe, 24" Chuck, Max Turning Diameter 32.7", Turning Ht. 29.5"
Get Financing
Used 2003 DOALL Vertical Bandsaw Model TF-2025NC Capacity 20" x 25"
Details
2003 DOALL Vertical Bandsaw Model TF-2025NC Capacity 20" x 25"
Get Financing
Used 1999 | DOALL C-650NC Fully Automatic | Used - Rebuilt Extra Heavy Duty
Details
1999 | DOALL C-650NC Fully Automatic | Used - Rebuilt Extra Heavy Duty
Get Financing
Used DOALL Automatic Horizontal Bandsaw, Model C-4100NC, 16" Round, 16" x 14"
Details
DOALL Automatic Horizontal Bandsaw, Model C-4100NC, 16" Round, 16" x 14"
Get Financing
Used 2008 DOOSAN MYNX Model 750, Travels: X= 59.06", Y=29.92", Z= 25.59", 12,000 RPM, BT40, 30 Tool ATC
Details
2008 DOOSAN MYNX Model 750, Travels: X= 59.06", Y=29.92", Z= 25.59", 12,000 RPM, BT40, 30 Tool ATC
Get Financing
Used AMADA Model HKA-800 Horizontal Bandsaw 20" x 31.5" Fully Automatic, Reconditioned, 80" infeed stoke
Details
AMADA Model HKA-800 Horizontal Bandsaw 20" x 31.5" Fully Automatic, Reconditioned, 80" infeed stoke
Get Financing
Used AMADA Semi-Automatic Mitering Column Type Horizontal Bandsaw Model HK-800, Used Rebuilt 32"x 23"
Details
AMADA Semi-Automatic Mitering Column Type Horizontal Bandsaw Model HK-800, Used Rebuilt 32"x 23"
Get Financing
Used CLAUSING COLCHESTER 17" X 80" with 3" hole through spindle, FOB Elk Grove Village, IL
Details
CLAUSING COLCHESTER 17" X 80" with 3" hole through spindle, FOB Elk Grove Village, IL
Get Financing
Used DAITO Model GA260 Fully Automatic NC Programmable Bandsaw, with Variable Vise Pressure
Details
DAITO Model GA260 Fully Automatic NC Programmable Bandsaw, with Variable Vise Pressure
Get Financing
Used AMADA MODEL HA-400W AUTOMATIC HORIZONTAL SAW
Details
AMADA MODEL HA-400W AUTOMATIC HORIZONTAL SAW
Get Financing
Used DAITO High Speed Drill for Structural Steel Model SDNFC 050 40" X 20" Capacity, 3 Spindles
Details
DAITO High Speed Drill for Structural Steel Model SDNFC 050 40" X 20" Capacity, 3 Spindles
Get Financing
Used HEM saw Model WF 190A-DC Capacity 25" x 44" Automatic, Dual Column, , 24" Roller Discharge, Optional Top Clamp, Bi-Directional Outboard Powered Vise on Feed Table
Details
HEM saw Model WF 190A-DC Capacity 25" x 44" Automatic, Dual Column, , 24" Roller Discharge, Optional Top Clamp, Bi-Directional Outboard Powered Vise on Feed Table
Get Financing
Used HEM Model V130HM Vertical Double Miter Bandsaw. Can be seen under power in IL. 20" x 24" capacity, 45 degrees L & R
Details
HEM Model V130HM Vertical Double Miter Bandsaw. Can be seen under power in IL. 20" x 24" capacity, 45 degrees L & R
Get Financing