SHARP Precision Lathe Model 1640LV

SHARP Precision Lathe Model 1640LV STANDARD EQUIPMENT: • 3-Jaw Chuck 10” • Face Plate (16”) • Steady Rest (1/2” to 6”) • Follow Rest ( 0.59” – 2.76”) • Coolant System • Full Length Splash Guard • American Tool Post • Halogen Worklight • Longitudinal Carriage Stop • Center sleeve ( MT 5 x 3) • Dead centers ( MT# 4x1, MT # 5 x1) • Tailstock • Machine is set only for 220 V. Needs an optional transformer for other applications. • Tool Kit includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 set of dead center, Pin for Indicator, Can of Pain FEATURES: • D1-8 Camlock, 3” Hole • Direct Selection For Inch/Metric Threads • One Piece Cast Meehanite Bed • 7-1/2 HP Spindle Motor • Digital Variable Speed (DVS) on “LV” Models • “LV” Models wired at 220v only. (440V requires optional transformer.) Please specify. ✓ Capacity • Swing Over Bed 16" Swing Over Cross Slide 8-3/4” Swing Over Gap 24-3/8” Travel of cross slide 9-1/2” Width of Gap 9-3/4" Center height from top of compound 1.9” Distance Between Centers 40” ✓ Headstock • Spindle Nose Type D1-8 Camlock • Spindle Bore 3- 1/16” • Spindle Speeds (12) 20-2,000 rpm • Taper of Spindle Bore MT#6 • Taper of Center MT#4 ✓ Threads and Feeds • Longitudinal Feeds – in/rev (18) 0.002 - 0.032” • Cross Feeds – in / rev {#} 0.0001 –0.0094” {12} • Inch Threads (#) 4-56 tpi {36} • Metric and Module Threads {#} 0.5-7mm {17} • D.P. Threads (36) 4-56 mm • Leadscrew Pitch, Diameter 4 tpi, 1-3/8” ✓ Carriage • Cross Slide Width 8.7” • Compound Rest Travel 4.9” • Compound Width 4.5” ✓ Bed • Bed Length 59” ✓ • Bed Width 11 3/4" Tailstock • Quill Travel (graduated) 5” • Quill Diameter 2-1/4” • Quill Taper MT#4 MT#4 ✓ General • Spindle Motor(220V or 440V, 60, 3) 7-1/2 HP • Net Weight (approx.) 3,600 lbs Standard Color Gray Specifications may be changed or improved without notice. ✓ Total Power Consumptions • 230V 8KVA/25 amps • 460V 8KVA/12.5 amps OPTIONS: • 3 - Jaw 12” Chuck (QU)in lieu of the 3 - Jaw 10” (Standard Equipment) 3J3J12D8 add $330.00 $330.00 NET 4 - Jaw 12” Chuck (QU) 3J12D8 $1,290.00 • 4 - Jaw 12” Chuck (QU) 4J12D8 $1,220.00 • 3 - Jaw Chuck 10” (Bison) 803-1038 $1,800.00 • 3 - Jaw Chuck 12” (Bison) 803-1238 $2,575.00 • 4 - Jaw Chuck 12” (Bison) 853-1238 $1,980.00 • Chuck Guard( factory order only) 18C-01 $590.00 • Installation of chuck guard net $195.00 • Tool guard ( factory order only) TG 16 L $1,870.00 • Lead screw guard ( factory order only)LSG-1640 L $1,490.00 • Guard behind spindle( factory order only)GBS -16L $75.00 • UL/CSA switch board/UL motor/CSA pump in lieu of regular version UL/CSA-16 ( factory order only) $1,550.00 BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS. • Micrometer Carriage Stop 18C-02 $225.00 • 4-Way Toolpost for 16” Swing Lathe 18C-05 $770.00 • Installation of 18C-05 $470.00 • Taper Attachment ( factory installed) 18C-03 $3,425.00 • Roller Jaws for Steady Rest 18C-04 $625.00 • (Extra) Steady Rest 16” for Lathes (1/2 – 6” Cap.) 16C-01 $785.00 • Steady Rest for 16” Lathes (4 – 9” Capacity) 16C-09 $1,560.00 • Drill & Arbor (JACOBS) 16/18-D/A $520.00 • Quick Change Tool (7 pcs) Holder Set (Aloris) CXA-2511-7250 $2,650.00 • Live Center – Royal (Dual Bearing) MT#4 10854 $490.00 • Live Center – MT#4 LC-MT4 $240.00 • 5C Collet Set (1/8” to 1-1/16” by 1/16”) 16 pcs. ACC-5C $495.00 • 5C Collet Closer for 16 / 18” Lathe (Atlas) CCD1-8 $2,435.00 • 575 V/440V/380V transformer, please select 440 T 10 net $1,595.00 • 10 HP motor in lieu of 7.5 HP with inverter ( factory order) $2,750.00 DIGITAL READ OUT SYSTEMS: • Fagor 20i D.R.O. FG-1640 $2,465.00 • Fagor 40i D.R.O. FG-40i-1640 $3,600.00 • Acu-Rite 203S D.R.O. AR-1640 $2,750.00 • Newall DP700 D.R.O. NWDP-1640 $2,840 Factory Installation for all D.R.O. systems NWDP-1640 $2,840.00 $$680.00 NET