SHARP Model 22100B Engine Lathe 22" x 100" Geared headstock, 12 Speeds, 15 HP

SHARP Model 22100B Engine Lathe 22" x 100" Geared headstock, 12 Speeds, 15 HP 22" and 26" swing over bed 10-1,000 rpm (12 speeds), 4.5” bore, 15 HP, one piece bed casting The “B” models are equipped with D1-11 camlock spindle, 4.5” spindle bore. The spindle is mounted on 2 precision tapered roller bearings and one ball bearing. This triple bearing support system ensure accuracy and rigidity at all times. Handles that are used for engaging gears are built with locking pins to prevent the handles from being knocked out of place accidentally or under heavy cutting circumstances. Pulling the spring-loaded handle back and then shift does repositioning of handles. The universal gearbox design allows easy selection of inch and metric threading by just turning the lever to the assigned position instead of changing individual gears outside the headstock. A rotational style lever that results in less movement of the gears compare with the back-and-forth shifting style lever does selection of gears at the gearbox. Less movement of the gears means less wear and greater accuracy. The gapped bed design allows extra large work piece to be chucked at the spindle when the gap is taken out. Bed ways are induction hardened and ground for durability. Headstock gears are hardened and ground, made out of Chrom-Moly alloy steel for maximum wear. The headstock is equipped with a job button that allows inching movement of the spindle for easy engagement of gears. One shot lube system is installed in the apron to direct lube oil to all the sliding surfaces. STANDARD ACCESSORIES: 4-jaw 16" Chuck 15HP Motor 12-Speed Gear Head Coolant System 4 Way Tool Post Halogen work light Face plate 20" Steady rest (4"-11.5") 4-Way Carriage Stop Splashguard 16" Chuck Guard Tailstock Follow rest Tool kit 3 Jaw chuck (12”, 15", 16”) 4 Jaw chuck (16”) Taper attachment Drill & Arbor Quick-change tool holder Live Center 5C collet closer Micrometer carriage stop Steady rest 12", 15" Roller Jaws Set (3 pcs) Digital Readout System (Fagor, Acu-Rite, Newall) • 3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $2,580.00 • 3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $4,630.00 • 4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $2550.00 • 3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $2410.00 • 4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $1,715.00 • Taper Attachment (Factory order) 991126 -22 $3155.00 • Installation of taper attachment net $760.00 • Drill & Arbor (JACOBS) 22/30B-D/A $770.00 • Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $2,295.00 • Live Center – Royal (Dual Bearing) MT#5 10855 $445.00 • Live Center – MT#5 LC-MT5 $200.00 • 5C Lever Collet Closer ( Altas) CCD1-11 $2,215.00 • 5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $340.00 • Micrometer Carriage Stop 20C-02 $290.00 • Steady Rest 12” ( 3.2”- 10.6”) 22B-STEADY12 $1,870.00 • Steady Rest 15” ( 6.7” – 15.2”) 22C-STEADY15 $2,230.00 • Roller Jaws Set (3 pcs) 26C-RJAW $1,090.00 DIGITAL READ OUT SYSTEMS: • Fagor 20i D.R.O. FG-22100 $4,265.00 • Fagor 40i D.R.O. FG-40i-22100 $4,485.00 • Acu-Rite 200S D.R.O. for 22100B, 26100B, 30100B AR-26100 $4,920.00 • Newall DP700 D.R.O. for 22100B, 26100B, 30100B NW-2610 $4,970.00 Factory Installation - D.R.O. $720 NET PRECISION LATHES - B SERIES CAPACITY Swing over bed 22" Swing over cross slide 13.2" Swing over gap 31" Distance between centers 120" HEADSTOCK Spindle nose type D1-11 cam lock Spindle bore 4.5" Spindle speeds (rpm) 10-1,000 rpm Taper of spindle bore MT #7 Taper of center MT #5 THREADS AND FEEDS Longitudinal feeds - in/rev (18) 0.002-0.032" Cross feeds - in/rev (#) 0.001-0.0094" (17) Inch Threads (#) 2-56 tpi (44) Metric and Module Threads (#)0.5-14mm (24) D.P. Threads (36)4-56 mm Leadscrew Pitch, Diameter 4 tpi, 1 - 1/2 CARRIAGE Cross Slide Travel 14.75" Compound Rest Travel 8" Compound Width 6" BED Bed length 140" Bed width 15.75" TAILSTOCK Quill travel (graduated) 6.5" Quill diameter 3" Quill taper MT #5 GENERAL Spindle motor 15 HP Net weight (lbs.)(approx)