SHARP Model 2680B Precision Lathe with 4.5" Spindle Bore Swing 26", 80" Centers

"New SHARP Model 2680B Precision Lathe with 4.5" Spindle Bore available at Blackout Equipment, LLC. This 2680 engine lathe boasts a 26" swing, 80" centers, and a powerful 15 hp motor. With a spindle speed range of 10-1,000 rpm, it's perfect for precision work. Trust Blackout Equipment, LLC for all your equipment needs. Contact us now!" STANDARD EQUIPMENT: • 4-Jaw 16” Chuck • Coolant System • 4 Way Tool Post • Halogen Work Light • Face Plate 20” • Steady Rest (4”-11.5”) • 4-Way Carriage Stop • Splash Guard • 16” swing chuck guard, optional 26” swing chuck guard is available • Tailstock • Follow Rest ( 1.57” – 6.3”) • Wired 220V or 440V. Please Specify • Tool Kit: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint •3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $2,580.00 •3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $4,630.00 •4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $2550.00 •3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $2410.00 •4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $1,715.00 •Taper Attachment (Factory order) 991126 -22 $3155.00 •Installation of taper attachment net $760.00 •Drill & Arbor (JACOBS) 22/30B-D/A $770.00 •Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $2,295.00 •Live Center – Royal (Dual Bearing) MT#5 10855 $445.00 •Live Center – MT#5 LC-MT5 $200.00 •5C Lever Collet Closer ( Altas) CCD1-11 $2,215.00 •5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $340.00 •Micrometer Carriage Stop 20C-02 $290.00 •Steady Rest 15” ( 6.7” – 15.2”) 26C-STEADY15 $2,625.00 •Steady Rest 19.5” ( 10.8” – 18.9”) 26C-STEADY20 $3,355.00 •Roller Jaws Set (3 pcs) 26C-RJAW $1,090.00 DIGITAL READ OUT SYSTEMS: • Fagor 20i D.R.O. FG-2680 $3,255.00 • Fagor 40i D.R.O. FG-40i-2680 $4,205.00 • Acu-Rite 203S D.R.O. AR-2680 $4,330.00 • Newall DP700 D.R.O. NWDP-2680 $4,055.00 Factory Installation - D.R.O. net $720.00  Capacity • Swing Over Bed 26" • Swing Over Cross Slide 17.24” • Center Height 13” • Swing Over Gap 35” • Distance Between Centers 80”  Headstock • Spindle Nose Type D1-11 camlock • Spindle Bore 4.5” • Spindle Speeds (12) 10-1,000 rpm • Taper of Spindle Bore MT#7 • Taper of Center MT#5  Threads and Feeds • Longitudinal Feeds – in/rev (18) 0.0022 - 0.032” • Cross Feeds – in / rev {#} 0.0026–0.035” {17} • Inch Threads (#) 2-56 tpi {44} • Metric and Module Threads {#} 0.5-14mm {24} • D.P. Threads (36) 4-56 mm • Leadscrew Pitch, Diameter 4 tpi, 1-1/2”  Carriage • Cross Slide Travel 13-3/4” • Compound Rest Travel 6.2” • Compound Width 6”  Bed • Bed Width 15-3/4” • Bed Length 120.5”  Tailstock • Quill Travel (graduated) 6-1/2” • Quill Diameter 3” • Quill Taper MT#5  General • Spindle Motor (220V or 440V, 60, 3) 15 hp • Dimensions 137” x 41” x 52” • Net Weight (approx.) 6,656 LBS • Standard Color Gray