SHARP Precision Engine Lathe Model 3080B Swing 30" Center Distance 80" Spindle Bore 4.5"

SHARP Precision Engine Lathe Model 3080B Swing 30" Center Distance 80" Spindle Bore 4.5" FEATURES: • D1-11 Camlock • 4.5” Spindle Bore • Direct Selection For Inch/Metric Threads • One Piece Cast Meehanite Bed • Quick Change Gearbox • 15 HP Motor • 12-Speed Gear Head (10-1,000 RPM) STANDARD EQUIPMENT: • 4-Jaw 16” Chuck. • Coolant System • 4 Way Tool Post • Halogen Work Light • Face Plate 20” • Steady Rest (4”-11.5”) • 4-Way Carriage Stop • Splash Guard • 16” swing chuck guard, optional 30” swing chuck guard is available • Tailstock • Follow Rest (1.57” – 6.3”) • Wired 220V or 440V. Please Specify • Tool Kit: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint  3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $2,840.00  3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $5,095.00  4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $2,805.00  3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $2,650.00  4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $1,885.00  Taper Attachment (Factory order) 991126 -22 $3,405.00  Installation of taper attachment net $835.00  Drill & Arbor (JACOBS) 22/30B-D/A $830.00  Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $2,480.00  Live Center – Royal (Dual Bearing) MT#5 10855 $480.00  Live Center – MT#5 LC-MT5 $220.00  5C Lever Collet Closer ( Altas) CCD1-11 $2,395.00  5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $370.00  Micrometer Carriage Stop 20C-02 $315.00  Steady Rest 12” ( 3.2”- 10.6”) 22B-STEADY12 $2,020.00  Steady Rest 15” ( 6.7” – 15.2”) 22C-STEADY15 $2,410.00  Roller Jaws Set (3 pcs) 26C-RJAW $1,180.00  Chuck Guard with limited switch ( factory order only) 22B-04 $510.00  Tool guard with limited switch ( factory order only) G 2240 $2,110.00  Lead screw guard ( factory order only) LSG-2240 $1,265.00  Guard behind spindle( factory order only) GBS-2240 $55.00  UL/CSA switch board/UL motor/CSA pump in lieu of regular version ( factory order) UL/CSA 2240 $1,980.00 BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN PUT COMPLIANCE STICKERS ON THE MACHINES AFTERWARDS. *** UL compliance certificate issued by CSA Group net $4,860.00 DIGITAL READ OUT SYSTEMS:  Fagor 20i D.R.O. FG-3080 $3,655.00  Fagor 40i D.R.O. FG-40i-3080 $4,3680.00  Acu-Rite 200S D.R.O. for 2280B, 2680B, 3080B AR-2680 $4,815.00  Newall DP700 D.R.O. for 2280B, 2680B, 3080B NWDP-2680 $4,380.00 Factory Installation - D.R.O. $790.00 NET  Capacity: • Swing Over Bed 30” • Swing Over Cross Slide 21” • Center Height 15” • Swing Over Gap 40” • Distance Between Centers 80”  Headstock: • Spindle Nose Type D1-11 camlock • Spindle Bore 4.5” • Spindle Speeds (12) 10-1,000 rpm(12 steps) • Taper of Spindle Bore MT#7 • Taper of Center MT#5  Threads and Feeds: • Longitudinal Feeds – in/rev (18) 0.0022 - 0.032” • Cross Feeds – in / rev {#} 0.0026 –0.035” {17} • Inch Threads (#) 2-56 tpi {44} • Metric and Module Threads {#} 0.5-14mm {24} • D.P. Threads (36) 4-56 mm • Leadscrew Pitch, Diameter 4 tpi, 1-1/2”  Carriage: • Cross Slide Travel 15.8” • Compound Rest Travel 7.8” • Compound Width 6”  Bed: • Bed Length 130” • Bed Width 15-3/4”  Tailstock: • Quill Travel (graduated) 6-1/2” • Quill Diameter 3” • Quill Taper MT#5  General • Spindle Motor (220V or 440V, 60, 3) 15 hp • Dimensions 147” x 45” x 77” • Net Weight (approx.) 6,732 LBS • Standard Color Gray