SHARP Radial Arm Drill Model RD 2500

SHARP Radial Arm Drill Model RD 2500 FEATURES:  Hardened and Ground Arm slide ways, gears  Arm Elevation is controlled by Hydraulic Motor  Safety Device prevents arm from dropping even when copper nut is worn  Clutch device to protect spindle and spline from damage upon overloading  Power tool release (tool knockout) for easy tool change  Hydraulic preset for spindle speed change  Counter balanced spindle (with casting) increases durability  Spindle depth setting with automatic kick out  T-Slots and Drain Channels on table and base casting  Auto reverse tapping function 22” column diameter MT#6 spindle 10 HP motor 98” column to spindle center Hardened and ground arm slide ways and gears Double tube column design to increase rigidity Arm elevation controlled by electric motor Built-in automatic tool ejector Safety device prevents arm from dropping even when bronze nut is worn out T-slots and drain channels on box table Box table Coolant system Auto spindle reverse for tapping Work light Tool box STANDARD EQUIPMENT:  Box Table  Coolant System  Worklight  Toolbox  Wired 220V or 440V. Please Specify. Tilting Table 32” x 28” x 24” RD1230-TILT $13,330.00 CSA parts upgrade and guarding net $5,075.00 CSA compliance certificate by CSA Group in Los Angeles net $4,535.00 SPECIFICATION: Diameter of column 21.65" Distance from column surface to spindle center, max. 98.42" Distance from column surface to spindle center, min. 19.68" Travel of spindle head 78.74" Distance from base surface to spindle end, max. 78.74" Distance from base surface to spindle end, min. 21.65" Elevating height of arm 39.37" Effective area of table 39.37” x31.49” x22.04" Dimensions of base 138.58” x 55.12”x 12.60" Taper hole in spindle MT#6 Stoke of spindle 17.72" R.P.M. of spindle (rpm range x steps) 16-1250 x 16 Steps Feed of spindle (rev.teps) 0.0016-0.126” x 16 Steps Main motor (HP) 10 HP Elevating motor (HP) 5 HP Coolant Equipment (HP) ¼ HP Machine height from floor (max) 157.09” Base + column height 151.57” Net weight (approx) lbs 24,200.Lbs. Shipping weight (approx) lbs 27,500.Lbs. Shipping dimensions (LxWxH) 157.48 x 63” x 151.57” Capacity Drilling Steel 3.15” Capacity Drilling Cast Iron 3.94” Capacity Tapping Steel 2.56” Capacity Tapping Cast Iron 2.94”