Rebuilt TOS TRENCIN Manual lathe Model SN 71B/3000, Swing 28", Distance betwen Centers 120"

Rebuilt TOS TRENCIN Manual lathe Model SN 71B/3000, Swing 28", Distance betwen Centers 120" FEATURES: o Machine with modern Motor and Electrics o USA/CAN electrical components (CSA approved) o Documentation in English o Warranty 12-months o CE Electrical Specifications SCOPE OF MACHINE REPAIR: o Cleaning of the machine + individual sub-groups of the machine. o Grinding of the slides, cross support, spindle and tailstock quill. Re-grinding of the bed-ways. o Grinding + scraping of the guiding ways/surfaces of the knife support, new screw with nut, new knife wedges o Scraping the guide surfaces of the headstock, slide, cross support, tailstock into geometric positions according to the machine accuracy protocol. o New screw with nut on the transverse slide, new transverse wedge and knife head. o Complete disassembly and repair of the support box, threaded box, headstock, gear box, tailstock, transverse and knife support. o Addition of the rapid feed, replacement of the hand wheel and the addition of a cover with the control of the rapid feed. o Addition of tailstock lightening. o New bearings in all subgroups of the machine. o Replacement of guide combs, repair of guide rods and towing screw. o Addition of a longitudinal micrometric gauge and a set of spare wheels. o New labels of the machine o New Paint Job of the Machine in its accesories RAL 9003, anthracite RAL 7016 o New switchboard with electrical components, New main motor, New rapid traverse motor, hydraulic pump o New LED lamp o Fixed and movable steady rest, strut bar (brace), threaded watch o 2-axes DRO o USA/CAN electrical components (CSA approved) o Accuracy protocol + electro report o Delivery time – 2 weeks after placing the P.O. o Location: Milton, Ontario, Canada o Warranty (1-Year spare parts) Machine ACCESSORIES (Included): o 1 pc Stedy rest (fixed) o 1 pc Follow rest (movable) o Strut bar (brace) o Threaded watch o Chuck cover o Guide screw and Tie Rod cover o Flange 315 B8 o Flange 400 B8 o Digital Readout LIMAT 2-axes (DRO) o Multifix head type C + 2 pcs knife holders PARAMETER US METRIC SWING OVER BED 28” 710 mm DISTANCE BETWEEN CENTRES 120” 3000 mm MAX. WEIGHT OF WORKPIECE 1870 lb 850 kg SWING OVER CROSS SLIDE 17” 420 mm SPINDLE SPEED 10 – 1 000 R.PM 10 – 1 000 R.PM MAIN MOTOR POWER 10/15 HP 7,5/11 KW MACHINE WEIGHT 7150 lb 3300 KG SPINDLE BORE 3” 73,5 mm MAX. TORQUE 2400 NM 2400 NM TAILSTOCK MORSE 5 MORSE 5 DIMMENSIONS L/W 195” x 131” 4945 x 3330 mm