WILLIS Model SE 32120 Geared Head Precision Engine Lathe, Swing & CC 32" x 120"; 6" Hole Thru, In Stock

WILLIS Model SE 32120 Geared Head Precision Engine Lathe, Swing & CC 32" x 120"; 6" Hole Thru, In Stock STANDARD FEATURES  20HP main spindle motor  6” spindle bore, A2-11 spindle nose  12 speeds (15 – 1,000 RPM)  Hardened and ground bed ways, and hardened headstock gears and shafts  Automatic and manual lubrication to bed ways and slide ways  Feed rod overload clutch  110V controls with no volt release and emergency stop  Gap bed  Inch / metric dual dials  Totally enclosed universal gearbox  Foot brake  2 speed tailstock quill  Steady Rest, 300mm maximum  Work light  Flood coolant system  Automatic bed stops  4-way tool post,  2 centers, instruction and parts manual, service tools The heavy duty Willis Mammoth SK & SE series conventional lathes are extremely robust, well-built, and dependable lathes. The SK & SE lathes have precision ground spindles supported at three points by high precision bearings. These hollow spindle lathes incorporate a straight forward, low maintenance design. Willis Mammoth SK & SE series geared head engine lathes feature large, widely spaced bed ways and a large diameter lead screw for maximum rigidity and minimum vibration. These lathes have a standard 4⅛” hollow spindle bore, and offer an optional 6” hollow spindle bore for the SE series. In addition, an optional rear chuck adapter, specifically designed for large diameter pipes and shafts requiring maximum holding power, for applications like oil field work, ship building, conveyor manufacturing, roller manufacturing, and hydraulic cylinder manufacturing is available on Willis geared head precision lathes. The heavy duty Willis Mammoth SK & SE series conventional lathes are extremely robust, well-built, and dependable lathes. The SK & SE lathes have precision ground spindles supported at three points by high precision bearings. These hollow spindle lathes incorporate a straight forward, low maintenance design. Willis Mammoth SK & SE series geared head engine lathes feature large, widely spaced bed ways and a large diameter lead screw for maximum rigidity and minimum vibration. These lathes have a standard 4⅛” hollow spindle bore, and offer an optional 6” hollow spindle bore for the SE series. In addition, an optional rear chuck adapter, specifically designed for large diameter pipes and shafts requiring maximum holding power, for applications like oil field work, ship building, conveyor manufacturing, roller manufacturing, and hydraulic cylinder manufacturing is available on Willis geared head precision lathes. The heavy duty Willis Mammoth SK & SE series conventional lathes are extremely robust, well-built, and dependable lathes. The SK & SE lathes have precision ground spindles supported at three points by high precision bearings. These hollow spindle lathes incorporate a straight forward, low maintenance design. Willis Mammoth SK & SE series geared head engine lathes feature large, widely spaced bed ways and a large diameter lead screw for maximum rigidity and minimum vibration. These lathes have a standard 4⅛” hollow spindle bore, and offer an optional 6” hollow spindle bore for the SE series. In addition, an optional rear chuck adapter, specifically designed for large diameter pipes and shafts requiring maximum holding power, for applications like oil field work, ship building, conveyor manufacturing, roller manufacturing, and hydraulic cylinder manufacturing is available on Willis geared head precision lathes. Price includes features listed below  Rear chuck adaptor (A2-11)  Longitudinal rapid traverse  20HP spindle motor Standard SK & SE Hollow Spindle Lathe Accessories: SE conventional lathe models offer a 6” spindle bore with A-11 mounts. All geared head lathes offer a gap bed and a totally enclosed universal gear box. These engine lathes provide inch, metric, modular, and diametric pitch threads. An inch thread dial is also provided. Automatic longitudinal bed stops are also included with these metalworking lathes SK and SE model lathes come equipped with a 2-speed tailstock quill. Inch/metric dials and graduations allow for accurate and precise machining. For optimal safety, a manual foot brake and an adjustable feed overload & safety clutch on the apron and carriage are standard on Willis geared head engine lathes SK & SE engine lathes provide hardened and ground gears as well as induction hardened and ground bed-ways. Willis conventional lathes have manual/automatic lubrication systems for the lathe’s slides. A flood coolant system enables our conventional lathes to maintain extended tool life. A rotary dial system on SK & SE conventional lathes for quick and easy spindle speed changes is also provided. A four-way tool post for quick tool changes is standard on Willis conventional lathes A 12” steady rest, center sleeve & 5MT dead centers are included with the SK & SE lathes. Our conventional engine lathes are provided with a tool box, tools and tool-post wrench. These engine lathes provide a halogen worklight for a brighter workspace. OPTIONAL ACCESSORIES Electronic infinitely variable spindle speeds, 120 day delivery $7,570 6” spindle bore, A2-11 spindle nose for SE Series Included 6” A2-11 rear chuck adapter for double chuck w/ guard Included 20HP spindle motor on SE Series, 60” – 100” Machines Included 24” faceplate $1,250 Chuck guard, 20” maximum chuck capacity $400 Chuck guard for larger chucks POR Steady rest, 300mm capacity, (1 is standard) $1,630 Steady rest, 180-450mm capacity $1,920 Steady rest, 400-600mm capacity $4,210 Follow rest $960 Full length rear splashguard $1,790 Traveling rear splashguard $800 Longitudinal rapid traverse Included 4-way rapid traverse, 120 day delivery $4,260 An Aloris quick change tool-post is also available on Willis engine lathes Taper turning attachment $2,790 105mm tailstock quill in lieu of standard, 120 day delivery $1,820 Aloris DA quick change tool post w/ 4 holders $2,030 Newall Digital Readouts $5,890 Additional options available on request POR Bison 3 and 4 jaw chucks 3 jaw 16” steel body Set-Tru, 5.35” hole, w/ A2-11 adaptor $6,400 3 jaw 20” steel body, A2-11 mount, 7.48” hole $12,340 3 jaw 20” semi-steel body, A2-11 mount, 7.4” hole $9,500 3 jaw 25” steel body, A2-11 mount, 7.4” hole $15,020 3 jaw 25” semi-steel body, A2-11 mount, 7.4” hole $13,710 4 jaw 16” forged steel body, A2-11 mount, 2 piece jaws, 3.9” hole $4,320 4 jaw 16” semi-steel body, A2-11 mount, 1 piece jaws, 3.9 hole, enlarge to 4.7” $3,420 4 jaw Oil Country, 16” Extra Heavy Duty, Forged Steel Solid Body, 6.5” Thru-Hole $8,910 4 jaw 20” forged steel body, A2-11 mount, 2 piece jaws, 4.9” hole $8,090 4 jaw 20” semi-steel body, A2-11 mount, solid jaws, 4.9” hole, enlarge to 6.1” $6,130 4 jaw 25” forged steel body, A2-11 mount, 2 piece jaws, 6.3” hole $12,600 4 jaw 25” semi-steel body, A2-11 mount, 1 piece jaws, 6.2”, hole $6,810  center height 16.3”  swing over bed 32.6”  swing over crosslide 23.6”  swing in the gap 43”  headstock spindle taper #5MT  headstock spindle bore 6”  width of bed 18.1”  gap length in front of faceplate 12”  crosslide travel 16.7”  compound travel 9.8”  tailstock quill travel 9”  tailstock quill taper #5MT  tailstock quill diameter 3.1”  Inch threads 2 – 28 TPI  Metric threads (39) 0.8 – 14mm  longitudinal feeds (in/rev) 0.001 – 0.027  cross feeds (in/rev) 0.0005 – 0.014