Description
A 6000W PrimaPress sheet-and-pipe fiber laser cutting machine configured for 118" (3,000 mm) pipe processing typically pairs a 6 kW fiber laser source (such as Raycus) with a dual-purpose plate-and-tube layout and a ~3,000 mm (118.1") tube processing length. Exact configurations vary by build and custom options on the PrimaPress 2-in-1 Sheet and Pipe Fiber Laser Cutting Machine. [1, 2, 3]
Laser & Cutting Capabilities
- Laser Power: 6,000W (6 kW) fiber laser (commonly Raycus), ~1070 nm wavelength. [1, 2, 3]
- Typical Max Cutting Thickness (6 kW): Up to ~25 mm (1 in.) carbon/mild steel, ~16–20 mm stainless steel, ~15 mm aluminum, and ~12 mm brass, depending on assist gas, nozzle setup, and edge quality requirements.
Flat Sheet & Pipe (118" / 3,000 mm) Specs
- Pipe Processing Length: 3,000 mm (~118.1") standard option on PrimaPress plate-and-tube integrated models (4,000 mm and 6,000 mm lengths are also offered). [1]
- Pipe Diameter & Profiles: Standard integrated plate-and-tube specs list φ20–220 mm pipe capacity (with larger custom/dedicated 2-in-1 builds listed up to 350 mm diameter), supporting round, square, rectangular, and profile tubes with pneumatic chucks. [1, 2, 3, 4]
- Flat Sheet Worktable: Commonly 3000 × 1500 mm (or 1550 × 3100 mm, ~5' × 10'), with larger worktable sizes available depending on model series. [1, 2, 3]
Motion, Precision & Power
- Speed & Accuracy: Max X/Y positioning/running speeds up to 120 m/min on PrimaPress plate-and-tube/PM-series specs, with positioning accuracy around ±0.03 mm/m to ±0.05 mm/m and repeatability around ±0.03 mm. [1, 2]
- Drive & Transmission: Servo motor drive systems (such as Yaskawa or Fuji depending on configuration) with precision rack-and-pinion and linear guides. [1, 2]
- Electrical & Cooling: Industrial water chiller cooling; 6 kW PM3015 specs list total power consumption under 40 kW (verify shop voltage/phase requirements for your specific build).
A 6000W (6kW) fiber laser typically cuts up to 25 mm (~1 inch) of carbon/mild steel, 16–20 mm of stainless steel, and 14–16 mm of aluminum for clean, usable edges.
Fab-Line Machinery
Typical Thickness Limits by Material
- Carbon / Mild Steel: Up to 25 mm for clean production cuts (occasionally pushed to 28–30 mm in testing, though speeds drop and edge quality degrades).
- Stainless Steel: Around 16–20 mm (clean cuts often top out near 16 mm, with maximum limits around 20 mm depending on gas and beam quality).
- Aluminum: Roughly 14–16 mm.
- Brass: Around 12–14 mm.
- Copper: Roughly 6–8 mm due to high reflectivity and thermal conductivity.
Specifications
| Manufacturer | PRIMAPRESS |
| Model | 6000W FIBER LASER WITH FLAT AND 118" X 13.77" DIAMETER PIPE CUTTING CAPABILITY |
| Year | 2026 |
| Condition | New |
| Stock Number | 26684 |






