
WILLIS Model RD-1300H Radial Drill Press Willis radial arm drills include hardened and ground steel gears that run in an oil bath These radial drilling machines incorporate a spindle and quill made from hardened and ground alloy steel Spindle return tension is easily adjustable on our radial drills through a well-built return spring A Double wall column with an oversize bearing provides easy rotation and maximum stiffness on all Willis radial arm drilling machines Power-feed rates on these radial machines are easily selected and can be changed while spindle in running Limit switches on our radial arm drilling machines are used to prevent over travel with power-feed The radial arms are raised and lowered by a separate motor with safety nut for operation safety Limit switches prevent radial arm over travel Hardened steel wear strips for top of arm ways allow for smooth head travel A Flood coolant system is provided on all Willis radial arm drills Box tables with T-slots on both top and side surfaces are also standard on Willis radial arm drills Fluorescent work light is provided Toolbox, tools, and operator/parts manual is also provided on all Willis radial arm drilling machines
Willis RD1300H Radial Drilling Machine • Totally enclosed drill head with oil bath and forced lube pump delivering oil to all the proper places • Double column for maximum rigidity • Hardened and ground alloy steel gears • Heavily reinforced and ribbed base • Hydraulic clamping for drill head, arm, and column • Box table, flood coolant, fluorescent work light standard 51 inch arm 2 inch drilling capacity 20 inch x 25 inch x 17 inch H box table 7.5 HP spindle drive motor 36 inch horizontal drill head travel 27 inch vertical arm travel 44-1500 RPM's 12 spindle speeds Hydraulic clamping for drill head and arm rotation Spindle feeds: 3 steps (0.004 inch ~ 0.024 inch)/rev
Arm Length | 4.25' |
Column Dia. | 12" |
Power | 7.5 hp |
RPM | 1,500 RPM |
Dimensions | 31" L x 70" W x 93" H |
Weight | 4,730 lbs |
Drilling capacity, maximum (steel / cast iron) 2-1/8” / 2-1/2” Column diameter 12” Max. distance spindle center to column 50” Horizontal head travel 36” Max distance spindle nose to base 48” Base dimensions 31” x 70” x 7” Net weight 4,800 lbs. Spindle stroke 10“ Spindle taper 5MT Spindle speeds (12) 44 - 1,500 Spindle feeds (6) “/rev 0.004 - 0.024 Spindle HP 7.5