MECO MEC 100 PREMIUM CNC keyseater, 25.59" part height with 40" dia capacity
Maximum productivity for large slotting machines
A MECO broaching machine for high production of large parts, allowing our customers to work with any type of slotting. The MEC 100 PREMIUM CNC is capable of working with a max height of 25.6" and keyway width from 3 to 4".
The CNC feed allows the machine to perform straight, conical or blind hole keyseating in addition to splines, both inside and outside. It includes a 3CV servomotor and electrical safety equipment, in addition to our automatic system for bringing in the cutting edge to the work start point, adjusting the path and the separation between part and tool.
To stand out from the competition, at MECO we have chosen to fit our keyseating machines with a large work bench that, in this case, means you can work with parts up to approximately 40" in diameter. In addition, the CNC technology control acts on the machine's main motor and the motor for displacing the actual work bench that can all be controlled from its tactile screen.
Finally, we should mention the automated separation system for the tool that provides a perfect finish on the parts and also extends the lifespan of our keyseating machines.
Main characteristics:
a. Vertical stroke adjustable from 0 to 25.59" directly with the touch screen.
b. Keyway width from 1/8" to 4.53" according to current regulations (or other
dimensions under request).
c. Working table with room for samples up to 39.37" diameter (approx),
equipped with an Automatic dividing plate for executing multiple keyways
in samples (multi slots, gears, external slots…). Includes: servo-engine
controlled from the touch screen, electronic equipment by CPU. Total
range of division: 360º.
d. 2 HP-Servo-engine with the electrical security equipment.
e. Automatic system by means of servo-engine equipment for: approximation of the tool to the sample (initial working point) and adjust of the stroke and
separation of the tool from the sample each time working cycle begins.
Adjustable from 0 to o.059".
g. CNC control for the main servo and for the working table. CNC
advantages:
i. Conical keyways mechanization in blind holes or through samples (with the
appropriate software).
ii. Regulation of the vertical stroke.
iii. Vertical stroke adjust tolerance of +/-0.0020".
iv. Regulation of the main stem working speed.
v. Regulation of the translation working speed.
vi. NC control over the keyway depth.
vii. All the functions can be adjusted from the touch screen.
vii. Select user language.

Standard Equipment
Complete Electrical Panel UL Approved
Mitsubishi Electrical Components
31-1/2” Built-In Rotary Table
360 Degree Rotary Scale
Upper and Lower Adjustable Stroke Limits
Cutter Retract During Upstroke
Electrically Interlocked Safety Guards
RECOMMENDED OPTION: UL MEC-100 Adaptation $7,600
3 AUTOMATIC AXES. Thanks to the electronic control systems of last generation that have been incorporated in this model for its three axes is achieved greater precision and a higher degree of automation. The machine can work in automatic mode, so that the operator can simply handle replace the part once the machine has finished the process of pre-programmed machining. Undoubtedly, the MECO broaching machines are designed to increase the production capacity of our customers.
LOWER GUIDED SYSTEM Z AXIS. Through a removable guide bar running through a clamping sleeve located at the bottom, we set the Z axis. As a result we suppress the bending of the shaft and the tool holder, and thus we cut absolutely straight and precise. This system allows us to remove more material in each pass and thus greatly shorten production times.