New
KALAMAZOO iNDUSTRIES Model S612V 6" Combination Sander with Collector
Belt Grinders Including Sanders| $3,395.00 USD |
KALAMAZOO iNDUSTRIES Model S612V 6" Combination Sander with Collector
The S612V is a universal belt and disc sander that works with all sanding belt and disc configurations so you can get your required finish. This combination sander comes with a multi-point sanding head, powerful motor, platen, vacuum base, and adjustable work tables to help you set your angles.
Beveling
Deburring
Squaring-up ends
Round flat corners
Polishing
Rust removal
Material clean up
Roughing
Flatwork
OPTIONS
294-006FP fireproof filter.
294-006 replacement filter.
MG-10 mitre gauge.
| Width of Belt | 6" |
3HP 1PH 220 OR 3HP 3PH 220 and or 440 volt TEFC motor.
Main Motor: 3PH FLA 230V 8 amps / 460v 4 amps.
Main Motor: 1PH FLA 115V 24 amps / 230V 12 amps.
Vacuum motor: 3PH 230V 2 amps and 460V 1 amp.
Vacuum motor: 1PH 230V (only) 3.5 amps
An on/off push magnetic button switch.
Steel base with built-in 100 CFM dust collector with a replaceable filter
Belt size: 6 x 48 inches
Belt SFPM: 2800
Quick change belt, pre-tensioned one lever belt change
Belt Sander multi-position horizontal/vertical
Steel reversible and replaceable 6-1/2″ x 14″ platen
Belt sander cast iron work table- 6″ x 10″ with 5/8th slot
Disc diameter: 12 inch disc sander disc, 5/8″ arbor
Sanding disc speed: 2500 SFPM
Disc sander cast iron work table- 7.75″ x 16.5 inch with 5/8th slot
Disc worktable dimensions: L12″ x W14″ x H 60″
Dual v-belt driven
Machine shipping weight: 425 lbs.
Machine shipping dimensions: L 45″ x W 33″ x H 65″