Type:
Vertical Mills
Manufacturer:
SHARP
Model:
LMV-50
Condition:
New - In-Stock
Year:
2021
Status:
For Sale
New
SHARP Knee Type Vertical Mill Vari Speed LMV- 50 STANDARD EQUIPMENT: • Hard-Chrome Ways and Gibbs • Precision Ground and Flaked Table • Unique Double Nut Backlash System • Double Fan Cooling System • Cutler Hammer On/Off Switch • Front and Rear Way Covers • One Shot Lube System (X, Y, Z Axes) • Tool Kit Includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set Of 6 Allen Wrenches, Philip Screw Driver, Flat Head Screw Driver, Oil Can, Grease Gun, Rear Way Cover Bracket, Pin For Indicator, Can Of Paint
STANDARD EQUIPMENT: - Hard-Chrome Ways And Gibbs - Precision Ground And Flaked Table - Unique Double Nut Backlash System - Double Fan Cooling System - Cutler Hammer On/Off Switch - Front And Rear Way Covers - One Shot Lube System (X , Y , Z Axes) - Tool Kit Includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set Of 6 Allen Wrenches, Philip Screw Driver, Flat Head Screw Driver, Oil Can, Grease Gun, Rear Way Cover Bracket, Pin For Indicator, Can Of Paint FEATURES: - 3HP Motor - Variable Speed Drive (60-4500 RPM) - R-8 Spindle - Dual Cooling Fans - Meehanite Casting - Chromed Ways - Self-Lubricating Motor Shaft Extends Pulley Life - Abec-7 Super Precision Spindle Bearings OPTIONAL ACCESSORIES: • 6” “Kurt” Vise with Swivel Base D688 5000-2126 A $ 1,185.00 • Auto lube pump $ 925.00 • Right Angle Milling Attachment with Arbor ACC-10-NT3 $ 1,820.00 • Right Angle Milling Attachment with Arbor ACC-10LMV-R8 $ 2,160.00 • “Sharp” Power Table Feed with Safety Handle (X-Axis)* SP-250A (see notes) $ 925.00 “Sharp” Power Cross Feed with Safety Handle (Y-Axis) SP-250B $ 925.00 “Sharp” Power Knee Feed with Safety Handle (Z-Axis) SP-250D $ 925.00 X Axis Installation $ 170.00 NET Y Axis Installation $ 280.00 NET Z Axis Installation $ 280.00 NET * NOTES: SP-250A installation may reduce the X-axis travel. • • Drill Chuck & Drill Arbor LMV-D/A $ 535.00 • 6” Riser Block ACC-R6 $ 1,190.00 Riser Block Installation $ 190.00 NET • Coolant System with Chip Pan at Base (pump included) 311-LMV $ 900.00 • “Maxi Torque Rite” Power Draw Bar TR-100 $ 965.00 Factory Installation $ 200.00 NET • R-8 Collet (Set of 11) - 1/8”-3/4” BY 1/16” ACC-R8 $ 260.00 • Clamping Kit (52 pcs/Steel Rack) CK-104 $ 250.00 • Halogen Work light WL-110V55W $ 265.00 • NT 30 spindle in lieu of R 8 R8-NT30 $ 1575.00 • CE mark net $ 1575.00 • 380V and 575 V transformer 440T4 $ 825.00 Net • UL components upgrade with electrical box ( factory order) LMV-UL $ 3675.00 • UL compliance certificate under State of California net $ 4500.00
| Table-W | 9" |
| Table-L | 50" |
| Travel-Long | 12" |
| Travel-Cross | 37" |
| Power | 3 hp |
| RPM | 4,500 RPM |
| Taper | R-8 |
| Dimensions | 7' x 6.5" x 6.75' |
| Weight | 2,500 lbs |
Table Working Surface 9" x 50" T-Slots Number and Size 3 Slots, 5/8" Capacity Travels (X,Y,Z) 37" x 12" x 5" Ram Travel 12" Knee Travel 16" Spindle to Column (Min-Max) 6 3/4”-18 1/2” Spindle Nose to Table 2 1/8”-18” Spindle Spindle Motor 3HP Spindle Nose Taper R8 Spindle Variable Speed Drive 60-4500 rpm Quill Feed 3 Speed (IPR) 0.0015, 0.003, 0.006 Head Swivels 360° Head Tilt (Up to Down) 45° Head Tilt (Left to Right) 45° Dimensions and Weight Floor Area 7' x 6.5' x 6.75' Weight 2500 lbs.
