New
ACRA/SUN FIRM SET Engine Lathe Model SET-3280 with 6" Bore
Engine Lathes| $65,000.00 USD |
ACRA/SUN FIRM SET Engine Lathe Model SET-3280 with 6" Bore
FULL STANDARD EQUIPMENT
20" 3 Jaw Chuck
Full Length Rear Splash Guard
Coolant System
Full Length
Steady/Follow Rest
20" 3-Jaw Chuck
Halogen Light
2 Way Rapid Traverse
4 Way Tool Holder
STANDARD EQUIPMENT:
Full Length Splash Guard
Full Length Rear Splach Guard
20" 3-Jaw Chuck
2-Way Rapid Travel
4 Way Tool Holder\2- 12" Steady Rests
Halogen Light
Coolant System
OPTIONAL ACCESSORIES:
Steady Rest (20”) ………………………………………………………………………………….$ 3,550.00
Steady Rest (24”) SET36 Only……………………………………………………………. $ 4,500.00
Face Plate……………………………………………………………………....……………………. $ 1,150.00
Taper Attachment……………………………………………………………….………………. $ 4,000.00
Installation Taper Attachment………………………………………….…….…………. $ 750.00
Change 6” to 9” A2-15 Nose…………………………………………….….…….………. $ 20,000.00
Newall Digital Read-Out-60" DP700…………………….………….………………….$ 3,250.00
Newall Digital Read-Out-60" NMS300…………….…………….……………………$ 1,600.00
Newall Digital Read-Out-80" DP700.………………………….……………………….$ 3,950.00
Newall Digital Read-Out-80" NMS300…………………………………………………$ 1,800.00
Newall Digital Read-Out-120" DP700…………….…………………………………… $ 5,200.00
Newall Digital Read-Out-120" NMS300…….…………………………………….... $ 2,300.00
Newall Digital Read-Out-160” DP700……………………………………………………$ 6,50.00
Newall Digital Read-Out-200” DP700……….…….……………………………………$ 8,100.00
Newall Digital Read-Out-240” DP700…….…………….………………………………$ 8.600.00
Acu-Rite Digital Read-Out-60"/80"/120" 203/303..................................................................................................$ P.O.R.
Fagor or Mitutoyo Digital Read-Out……………………………………………………….$ P.O.R.
| Swing | 32.625" |
| Centers | 80" |
| Spindle Bore | 6" |
| Power | 25 hp |
| RPM | 1,000 RPM |
| Swing Over Cross Slide | 23.625" |
| Dimensions | 157.5” x 63” x 74.8” |
| Weight | 13,000 LBS |
Capacity
Swing Over Bed 32.675"
Swing Over Cross Slide 23.625"
Swing in Gap 43.250"
Width of Gap 8.875"
Distance Between Centers 80"
Headstock
Spindle Bore 6.02”
Spindle Nose A2-11
Taper of Center M.T. No. 5
Range of Spindle Speeds 15-1,000 RPM
Number of Spindle Speeds 12
Changes Feeds
Threads Cutting
Longitudinal Feeds 0.002-0.028 in/rev
Cross Feeds 0.00098-0.014 in/rev
Inch Threads 1-1/2 T.P.I., (D.P. 4-56)
Metric Threads 0.0031-.55 in /Thread,
(M.P.0.5-7)
Leadscrew 1-3/4 x 2 T.P.I.
Carriage
Cross Slide Travel 16-1/2"
Compound Rest Travel 10"
Tailstock
Quill Diameter 3-3/4"
Quill Travel 9"
Taper of Quill M.T. No.5
Bed One-piece machine bed which is most suitable for heavy duty machining
Width of Bed 18-1/8"
Length of Bed 140"
Main Motor 25HP x 4P
Weight (Approx) 13,000 lbs.
Packing Size (Lx W x H) 157.5” x 63” x 74.8”
VOLTAGE: 230/440V/3PH