New
KENT International Model KGS-1020AHD 10" x 20" Capacity 3 Way Automatic
Reciprocating Surface Grinders
KENT International Model KGS-1020AHD 10" x 20" Capacity 3 Way Automatic
KENT (Kent Industrial Co., Ltd. in Taiwan and Kent International USA) is a manufacturer with history of 50 years and the very first Taiwanese grinder manufacturer. Producing more than 125,000 grinders since the beginning. KENT makes own spindles, magnetic chucks, and hand scraping guideways. These are key components for keeping high-quality of grinders. As a manufacturer, KENT controls the design, spec and quality in-house and always supports customers with responsive service and parts supply
V & Flat TURCITE Table Ways; Double-V TURCITE Cross Ways;
Cast Iron Base; Vernier Down-feed Graduation Dial; Hydraulic Table;
Solid State Controlled Cross-feed; Auto Incremental Down-feed;
Class-7 Paired & Pre-loaded Bearing Spindle; Auto. Lub. Pump.
Packaged with: 10”x20” Electric Magnetic Chuck & “Kent” Chuck Control,
Full Length Rear Splash Guard, Two Front
Table Splash Guard, Overhead Parallel Dresser, Halogen Work Light, Magnetic Separator & Coolant System
Features & Capability
Longitudinal on V-flat Turcite scraped guideways
Double V Turcite Cross Ways
Saddle traveling cross-feed
Motorized rapid elevation
Cast Iron Base
Vernier Down-Feed Graduation Dial
Hydraulic Table
Solid State Controlled Cross-Feed
Incremental Down Feed
Class 7 Paired & Pre-Loaded Bearing Spindle
Auto Lub. Pump
Voltage 220v 3 phase
Spindle motor frequency inverter *Optional
Hydraulic oil chiller *Optional
Full enclosure *Optional
Overhead hydraulic wheel dresser
Variable spindle speed *Optional
Surface grinding
Plunge grinding
STANDARD EQUIPMENT
Wheel Balancing Base x 1 pc Wheel Balancing Arbor x 1 pc
Grinding Wheel x 1 pc Wheel Flange x 1 pc
Table Dresser x 1 pc Tools & Tool Box x 1 set
OPTIONAL EQUIPMENT
Magnetic Separator & Paper Filter Coolant System (M2) $3,850.00
Digital Read Out System
DRO Installation & Display Arm & Tray, Mounting Bracket
Fine Pole Electromagnetic Chuck
Table Splash Guard (Rear)
Full Enclosure Guarding
Spindle Motor Frequency Inverter for Variable RPM
Hydraulic Oil Chiller
Extra Wheel Flange $ 90.00
Table Splash Guard Rear $ 45.00
| Table-W | 10" |
| Table-L | 21" |
| Spindle (Horz/Vert) | Horz |
| Power | 3 hp |
| Grinding Wheel Width | 1" |
| Grinding Wheel Dia. | 8" |
| Dimensions | 94" x 71" |
| Weight | 3,150 lbs. |
Specification
KGS-1020AHD
Capacity
Overall table working area: 10" x 20"
Longitudinal table travel: 23.25"
Cross-feed table travel: 10.8"
Distance spindle center to table: 19.25"
Grinding Wheel
Wheel dimension (Dia. x W x Bore) 8" x 1" x1.25"
Spindle speed 3,480 RPM
Vertical Movement
Vertical on MPG / Handwheel 1 gra: 0.0005"
Vertical on MPG / Handwheel 1 rev: 0.1"
Auto down-feed increment: 0.0001-0.001"
Motor
Spindle motor 3 HP
Dimension & Weight
Machine height: 70"
Floor space: 94" x 71"
Net weight: 3,150 lbs.
Gross weight: 3,590 lbs.