New
Sharp LMV 49/DVS/MP-2; Mill Package with Acu-Rite 2-Axes CNC Millpwr Control and 3- Axes Readout
Vertical Mills| $38,420.00 USD |
Sharp LMV 49/DVS/MP-2; Mill Package with Acu-Rite 2-Axes CNC Millpwr Control and 3-Axes Readout
FULL – FEATURED:
MILLPWR IS A FULL – FEATURED 2-AXES CONTROL/3-AXES READOUT WITH A NUMBER OF
SOFTWARE AND HARDWARE FEATURES.
SOFTWARE
Dimension Functions:
ABS/INC, POLAR/CARTESIAN, INCH/METRIC.
Programming:
PROGRAM IN/OUT, POSITION/DRILL, MILL LINES, MILL ARC, BLEND (CORNER RADIUS) HOLES (BOLT CIRCLE, RECTANGULAR ARRAY, RECTANGULAR FRAM, LINE),
CIRCLE (POCKET, FRAM, RING), RECTANGLE (POCKET, FRAME, SLOT, FACING) 9,999 STEPS OF PROGRAM SIZE
Special Features:
CUSTOM POCKETS, REPEAT, ROTATE, MIRROR IMAGE.
Run Options:
SINGLE STEP, DRY RUN, GRAPHICS ONLY, MANUAL POSITIONING.
Calculator Functions:
GEOMETRY, TRIG.
HARDWARE:
Operator Console:
EASY TO USE FORMAT. CONVERSATIONAL ENGLISH. THREE DIMENSIONAL HARD KEYS. 10” FLAT PANEL, COLOR LCD DISPLAY. REMOTE STOP/GO SWITCH.
Controller Cabinet:
HEAVY DUTY ENCLOSURE MODULAR CONSTRUCTION, 1 GHz Intel Celeron MICROPROCESSOR.
USB AND RS232 INTERFACE
12.1” HIGH RESOLUTION DISPLAY WITH 3 D GRAPHICS
115VAC – 20 AMPS
Positioning:
PRECISION LINEAR GLASS SCALES. CLOSED LOOP FEEDBACK THROUGH SERVO AMPLIFIERS. DC SERVO MOTORS. PRECISION GROUND BALL SCREWS.
2 years warranty of the control
STANDARD EQUIPMENT:
Hard-chrome way
Front and rear way covers
Automatic Lube System
2 axes CNC control ( X/Y)
DVS head, 220 V only needs a transformer for 440 V application
Tool Kit includes:
Machine manual, Half nut wrench, Wrench 17, & 19m, Set of 6 Allen wrenches, Phillip screwdriver, Flat head screw driver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
OPTIONAL ACCESSORIES:
Acu-rite Electrical Edge Finder 283273-01 $ 1,490.00
Acurite D.R.O. System on Knee AR-LMV-MP21 $ 2,490.00
DRO System Installation Charge $ 350.00 NET
Sharp Power Kneel Feed SP-250D $ 925.00
Power Kneel Feed installation $ 300.00 NET
6” “Kurt” Vise with Swivel Base 5000-2126 A $ 1,470.00
Drill Chuck & Drill Arbor LMV-D/A $ 560.00
Coolant System with Chip Pan At Base C311-LMV $ 970.00
“Maxi-Torque Rite” Power Draw Bar TR-100 $ 1,040.00
Factory Installation Charge – PDB, Each $ 215.00 NET
R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16” ACC-R8 $ 280.00
Clamping Kit (52 pcs/steel rack) CK-104 $ 270.00
Halogen Work light WL-110V55W $ 275.00
Riser block 6”. ACC -06 $ 1,250.00
Factory installation net $ 210.00
Sharp also offer Fagor 8055i control for this mill please call for price
CE mark ( factory order only) $ 1,735.00
440 V transformer 440T4 net $ 910.00
| Table-W | 9" |
| Table-L | 42" |
| Travel-Long | 25" |
| Travel-Cross | 11" |
| Power | 3 hp |
| RPM | 4,500 RPM |
| Taper | R-8 |
| Control | CNC (Acu-Rite MILLPWR 2) |
| Dimensions | 7' x 6.5' |
| Weight | 2,400 lbs |
SPECIFICATIONS:
Table
Working surface 9” x 49”
T-slot number, size 3, 5/8”
Capacity
Table travel; x-axis 31” (w/Millpwr Installed)
Saddle travel; y-axis 11”
Ram travel 12”
Quill travel; z-axis 5”
Knee travel 16”
Spindle to column (nim-max) 6 ¾” – 18 ½”
Spindle to nose to table 2 1/8”-18”
Spindle
Motor 3 HP
Wiring voltage 220/440V, 3 phase, 60 H
Taper R-8
Speeed (vari-speed) 65-4, 500 RPM
Quill feed (IPR) 0.0015, 0.003, 0.006”
Head swivel 360°
Head tilt; right-to-right-left (each way) 45°
Head tilt; up-and-down (each way) 45°
www.sharp-industries.com On The Cutting Edge of Manual and CNC Machining May 2022
Dimensions and Weight
Floor area (w x d) 7 x 6.5’
Net weight (approximately) 2,400 lbs